Malossi Crank case Gasket
Post Reply    Forum -> Not-So-Modern
Author Message
PX 210
Joined: 01 Feb 2020
Posts: 1
Location: Ayrshire ,Scotland
Sun Feb 02, 2020 3:29 pm quote
Evening all
Just bought a set of 200 Malossi casings and it says on the booklet to use silicon sealant.
Is this a must or can I use a SIP crankcase gasket ?
Which sealant would you recommend if not?
Many thanks
Joined: 22 Jul 2018
Posts: 84

Sun Feb 02, 2020 4:27 pm quote
I would do exactly what Malossi said since they know best for their product.

Dirko grey or Yamabond. Same as any case without gaskets like a motorcycle or VW/Porche
Joined: 14 Jun 2016
Posts: 107
Location: Macedonia
Mon Feb 03, 2020 2:51 am quote
Nice video by FMP explaining why you need to use a sealing mass on the Malossi cases.

Molested & Abused 2003 Stella 2T
Joined: 12 Sep 2015
Posts: 146
Location: Madtown
Mon Feb 03, 2020 10:31 am quote
Any chance you would post a pic of the instructions? I just grabbed a Malossi 200 case from Ebay but they were slightly used (PO had installed brake backing plate and shoes and a couple of bearings, and I don't have any instructions.

PO said it was the "old style Malossi cases", not sure what that means as to need for silicone.
Molto Verboso
1979 P150X, 1983 P200E, 1987 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 1891
Location: Veria, Greece
Mon Feb 03, 2020 1:46 pm quote
yackee wrote:
PO said it was the "old style Malossi cases", not sure what that means as to need for silicone.
The "old" Malossi cases are basically reproduced originals. They need a gasket...
Cross Egypt Challenge - A 2400km ride throughout Egypt   vespa scooterwest scooter west Motorsport Scooters   Cool Ass scooter seat cover
Post Reply    Forum -> Not-So-Modern
[ Time: 0.1401s ][ Queries: 25 (0.0353s) ][ Debug on ]