No spark on P200
Post Reply    Forum -> Not-So-Modern
Author Message
Hooked
1970 180 Rally, 1980 P150X and P200E
Joined: 22 May 2017
Posts: 229
Location: George, South Africa
Fri Oct 16, 2020 7:06 am quote
My P200 has suddenly died on me. I tried new plugs and a new CDI unit, still nothing. Then I measured the pickup unit: 116, which is good, and then I measured the ignition coil: 520, which is also within range. Still no spark.

What else can I test or check for?
Hooked
79p200e 66smallstate 85pk50xl 84p125ets 63GL
Joined: 24 Nov 2016
Posts: 232
Location: Flatness, TX
Fri Oct 16, 2020 7:34 am quote
Should be 2 green wires going to CDI. Pull the green wire going to CDI from the handle bars. If you have spark, you have a short of the kill wire in the frame.

Also check continuity between white wire and frame. This should have a good connection as it is your ground.
Hope this helps.
Missouri Loves Company Rally   Vespa Wasp Pin Badges   Scooter Parts Company
Post Reply    Forum -> Not-So-Modern
[ Time: 0.1229s ][ Queries: 26 (0.0325s) ][ Debug on ]