Exhaust fit
Post Reply    Forum -> Not-So-Modern
Author Message
Lurker
Joined: 01 Mar 2018
Posts: 3

Mon Jun 22, 2020 7:10 pm quote
Hi guys

Can I check whether the original exhaust for pre-catalyser Px150 ( before 2011) can fit into the newer PX150 (2011 onwards) which comes with the original catalyser exhaust?

Thank you!
Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 7646
Location: Victoria, Australia
Tue Jun 23, 2020 7:12 pm quote
Yes.

If you need to buy a new one anyway, then you'll get a free power upgrade by using an exhaust like the SIP Road 2 or similar.
Cheapest power improvement you can make.
Member
2005 Vespa PX150
Joined: 16 Jun 2020
Posts: 6
Location: NH, USA
Mon Jun 29, 2020 7:52 pm quote
Having just installed the SIP Road 2 on my '05 PX, there is no way in heck I would consider replacing a stock pipe with a stock pipe. The SIP pipe woke the bike up quite a bit, much more mid range power without bogging, a bit more top speed, and sounds much better without being obnoxiously loud. The mounting flanges needed a little adjustment to fit properly, but not too bad. The carb re-jet is easier than putting all your tools away.
Missouri Loves Company Rally   Vespa Wasp Pin Badges   AF1 Racing Vespa Austin
Post Reply    Forum -> Not-So-Modern
[ Time: 0.1429s ][ Queries: 23 (0.0342s) ][ Debug on ]