Handlebar Vespa seat
Post Reply    Forum -> Not-So-Modern
Author Message
Hooked
1970 180 Rally, 1980 P150X and P200E
Joined: 22 May 2017
Posts: 252
Location: George, South Africa
Sun Feb 14, 2021 12:22 pm quote
On a handlebar Vespa (VN2), how is the choke lever attached to the seat? If someone could send me a close-up photo, I would appreciate it very much
Member
66 bluebadge,primavera,2x 74 rally,79 p200e 64 gl 2x 64 vbb 2x ld 57 ld 125
Joined: 08 Dec 2014
Posts: 24

Sun Feb 14, 2021 1:34 pm quote
I think this is the part between the lever and the carb. the end that isnt a hook slides onto the lever at the break in the triangle (if that makes sense). Not sure about the carb side. Hope that helps !https://www.scooterwest.com/choke-wire-022740.html
Member
1959 Allstate
Joined: 29 Nov 2020
Posts: 23
Location: Los Angeles
Mon Feb 15, 2021 7:34 pm quote
Re: Handlebar Vespa seat
danie wrote:
On a handlebar Vespa (VN2), how is the choke lever attached to the seat? If someone could send me a close-up photo, I would appreciate it very much
Do you have the spring?
Hooked
1970 180 Rally, 1980 P150X and P200E
Joined: 22 May 2017
Posts: 252
Location: George, South Africa
Mon Feb 15, 2021 8:47 pm quote
Yes, I have the spring and choke wire, but as you can see, how the spring/choke lever is attached/bolted to the seat, is unclear.

Vespa 1957 017 copy.jpg
Seat

Hooked
1970 180 Rally, 1980 P150X and P200E
Joined: 22 May 2017
Posts: 252
Location: George, South Africa
Tue Feb 16, 2021 10:05 am quote
Sorry guys, my stupidity. After I had a good look at the choke lever, I realized that it bolts to the underside of the seat bracket.
Your Rally Here   vespa scooterwest scooter west Motorsport Scooters   AF1 Racing Vespa Austin
Post Reply    Forum -> Not-So-Modern
[ Time: 0.1518s ][ Queries: 27 (0.0401s) ][ Debug on ]