First of all, I got the color at
http://www.matthys.net/english/ezshop/ezfind/EN_article_detail.asp?EzShopCode=0152262020105201552&EzShopAccount=&Article=R+FBP5060&EzShopStartPosition=0&EzShopTarget=3&EzShopCategory=0&EzShopType=0&EzShopScope=10&MasterCat=115
They seems to deliver all over the world.
It is a color which resembles a foam, and which once dry resembles rubber. It resists the "high" temperatures, is elastic, thus does not crack, does not attack rubber and is of course matte.
Before applying it: to clean the tires with acetone while rubbing with the green side of a sponge Brite Scotch tape. After drying, to start again with detergent Saint Marc diluted in hot water then to rinse.
To let dry approximately 2 hours and paint 2 or 3 layers.Not to be worried to put color on the rim, it is enough to wipe it with a rag, by putting its nail between the tire and the rim as guide.
If put color on the tire (out of the sides), to wipe immediately. If the traces are dry, a small fine sandpaper to erase...
And here, a beautiful Vintage GT...
My white sides have 200km now and are brown (as the remainder of the scooter) and I cannot thus judge on the long term, but that seems to hold well. I will keep you informed.
