Hardwire Zumo 660 to 2011 S 150
Post Reply    Forum -> General Discussion
Author Message
Lurker
Vespa S 150
Joined: 24 Aug 2010
Posts: 3
Location: Philadelphia
Tue Aug 24, 2010 3:38 pm quote
Trying to hard wire install a Zumo 660 to my 2011 S 150. I get the electronics but can't figure out the best way to get the wires threaded into the head unit. The cables for the GPS are attached so some bulky hardware and I don't want to start cutting them up. Any ideas or links with instructions for this project? I've seen pictures where the wire goes through the mirror's rubber cover. This would be ideal but I'm just looking for a clean look. The unit itself will be RAM mounted to the mirror stem.
El Macho
KTM Super Duke 1290, Vespa GTS 300
Joined: 27 Oct 2006
Posts: 9022
Location: Belfast Metropolitan Area
Thu Sep 02, 2010 8:33 am quote
Moved to general discussion.
El Macho
KTM Super Duke 1290, Vespa GTS 300
Joined: 27 Oct 2006
Posts: 9022
Location: Belfast Metropolitan Area
Thu Sep 02, 2010 8:34 am quote
I would remove the front of the headset and connect the wiring to one of the running lights. Zumos use very little current. Plenty of info in the Wiki.
Rallies Europe 2016   vespa scooterwest scooter west Motorsport Scooters   Cool Ass scooter seat cover
Post Reply    Forum -> General Discussion
[ Time: 0.1361s ][ Queries: 24 (0.0291s) ][ Debug on ]