Main Page

Recently Added
Recently Edited
Added By Me
Edited By Me

All Articles

Discussion Forum
X10 LCD display miles/km units setting.
The owners manual is not correct for this model.

It says:-
To change the measurement units used on the display, proceed as follows:
- insert the key and turn it to the «KEY ON» position;
- pressing and holding the «MODE» button the measurement units on the display start
- with a brief press of the «MODE» button, it is possible to change the desired measurement,
that will stop flashing;
- with a long press of the «SET» button the choice is confirmed and it is possible to
repeat the operation for other sizes.

In fact you must press and hold the mode button before and during turning on the ignition.
Last Updated Fri Dec 13, 2013 2:55 am
[ Time: 0.1466s ][ Queries: 19 (0.0425s) ][ Debug on ]