Sun Jul 05, 2009 6:33 am

Moderaptor
The Hornet (GT200, aka Love Bug) and 'Dimples' - a GTS 300
Joined: 26 Aug 2007
Posts: 40219
Location: Pleasant Hill, CA
 
Moderaptor
The Hornet (GT200, aka Love Bug) and 'Dimples' - a GTS 300
Joined: 26 Aug 2007
Posts: 40219
Location: Pleasant Hill, CA
Sun Jul 05, 2009 6:33 am linkquote
Don't worry, it's a lock-selling spammer, long since gone.
⬆️    About 8 months elapsed between posts    ⬇️
Wed Mar 03, 2010 4:02 pm

Hooked
Joined: 14 Feb 2010
Posts: 151
Location: Chicago, IL / Tampa, FL
 
Hooked
Joined: 14 Feb 2010
Posts: 151
Location: Chicago, IL / Tampa, FL
Wed Mar 03, 2010 4:02 pm linkquote
Re: GRIPLOCK SEEMED LIKE A GOOD IDEA BUT WORTHLESS!!!!
Silva Goose wrote:
I BOUGHT ONE OF THESE, AND MY BIKE WAS STOLEN, LUCKILY IT WAS RECOVERED, ALL THE SCUM BAGS DID WAS CUT THE BRAKE CABLE AND WHEEL IT AWAY.

THE POLICE FOUND IT WITH A LOAD OF OTHER BIKES A FEW DAYS LATER, WHEN I WENT TO COLLECT IT THE GRIP LOCK STILL ON. I HAD LEFT THE KEYS FOR THE LOCK AT WORK AND DESPERATELY WANTED TO RIDE IT HOME, SO I BORROWED A HAMMER, GAVE THE LOCK ONE HIT AND THE KEY BARREL BROKE., AND OFF I WENT.

I NOW USE A DISC LOCK AND A CABLE, THINKING ABOUT AN ALARM ALSO, ANY RECOMENDATIONS???
So they cut the brake cable to wheel the bike away, then you rode it home from the police lot without breaks? I think not...
Wed Mar 03, 2010 5:57 pm

Moderaptor
The Hornet (GT200, aka Love Bug) and 'Dimples' - a GTS 300
Joined: 26 Aug 2007
Posts: 40219
Location: Pleasant Hill, CA
 
Moderaptor
The Hornet (GT200, aka Love Bug) and 'Dimples' - a GTS 300
Joined: 26 Aug 2007
Posts: 40219
Location: Pleasant Hill, CA
Wed Mar 03, 2010 5:57 pm linkquote
Please read a whole thread before replying - and also look at the dates...
⬆️    About 4 months elapsed between posts    ⬇️
Sun Jul 11, 2010 7:02 pm

Lurker
Vespa LX 150
Joined: 11 Jul 2010
Posts: 1
Location: South Euclid, Ohio
 
Lurker
Vespa LX 150
Joined: 11 Jul 2010
Posts: 1
Location: South Euclid, Ohio
Sun Jul 11, 2010 7:02 pm linkquote
Grip Lock
I have a grip lock and think it is great. If someone wants your bike they can always get a truck and pick it up and go off with it but that is why I have insurance. I like the grip lock for the convenience and visability. What I think would also be a great idea is to put a gps tracking device on the Vespa so if someone takes your bike you can track it down. Then you can put a warning sticker on the bike that says WARNING GPS SECURITY ON BOARD. I don't think a thief would want to take the chance of getting caught. Even if you only had a decal that said that on the bike it would scare them off.
Mon Jul 12, 2010 4:14 pm

Hooked
GTS 250ie
Joined: 19 Dec 2008
Posts: 163
Location: Jupiter, Florida
 
Hooked
GTS 250ie
Joined: 19 Dec 2008
Posts: 163
Location: Jupiter, Florida
Mon Jul 12, 2010 4:14 pm linkquote
You want it back quick how about LoJack
http://www.lojack.com/motorcycle/pages/motorcycle-recovery.aspx

Jack
⬆️    About 2 years elapsed between posts    ⬇️
Wed May 09, 2012 4:32 pm

Ossessionato
Joined: 17 Jul 2009
Posts: 3727
Location: Venice Beach, CA
 
Ossessionato
Joined: 17 Jul 2009
Posts: 3727
Location: Venice Beach, CA
Wed May 09, 2012 4:32 pm linkquote
FYI the Griplock does not work properly on all bikes.
It is fine on my GTS and PX, but not with the Buddy Blackjack that I had.
That has a very small braker lever, with a very thin knob on the end. As well as unusually small stock grips.
With the Griplock properly installed I could just slide it off with little effort.
Fri May 18, 2012 4:12 am

Hooked
Joined: 14 May 2009
Posts: 238
Location: CANADA
 
Hooked
Joined: 14 May 2009
Posts: 238
Location: CANADA
Fri May 18, 2012 4:12 am linkquote
I've been using a Grip-Lock on my Kymco for a year now and it's part of the security I use. I've added a the Mini Grip wheel lock as well and I also use a disc brake lock.

⬆️    About 2 months elapsed between posts    ⬇️
Thu Jul 12, 2012 6:13 am

Hooked
Joined: 14 May 2009
Posts: 238
Location: CANADA
 
Hooked
Joined: 14 May 2009
Posts: 238
Location: CANADA
Thu Jul 12, 2012 6:13 am linkquote
I bought one of these Grip-Locks a couple years ago in bright yellow and I've been using it on my scooter ever since. Mine does not use the circular key, but instead has a unique slot type key which has performed perfectly so far. I use this in combination with a wheel lock called the Mini Grip made by California Immobilizer. Both easily fit under the seat of my BV250 and I still have room for extra goodies.

http://immobilize.com/mini-grip.htm
⬆️    About 2 years elapsed between posts    ⬇️
Tue Mar 04, 2014 2:18 am

Lurker
Gylera Runner
Joined: 04 Mar 2014
Posts: 1

 
Lurker
Gylera Runner
Joined: 04 Mar 2014
Posts: 1

Tue Mar 04, 2014 2:18 am linkquote
nice post
i think the only drawback is the fact that it is not made out of metal but rather of plastic. it's a good setback though for potential thieves... i made a review about it here in my blog - http://www.benshardwareblog.com/transportation/motorbike-brake-lever-lock

thanks
Tue Mar 04, 2014 5:46 pm

Veni, Vidi, Posti
2020 Honda NC750DCT ABS
Joined: 06 Feb 2006
Posts: 6829
Location: Maple Grove, MN
 
Veni, Vidi, Posti
2020 Honda NC750DCT ABS
Joined: 06 Feb 2006
Posts: 6829
Location: Maple Grove, MN
Tue Mar 04, 2014 5:46 pm linkquote
Re: nice post
bengg wrote:
i think the only drawback is the fact that it is not made out of metal but rather of plastic. it's a good setback though for potential thieves... i made a review about it here in my blog - http://www.benshardwareblog.com/transportation/motorbike-brake-lever-lock

thanks
"Reinforcement: Reinforced with 3 x 3.1mm hardened steel rods - specifically designed to be harder than hacksaw blades "
⬆️    About 6 months elapsed between posts    ⬇️
Mon Aug 25, 2014 4:09 pm

Hooked
Vespa GTV250:: Et4 150
Joined: 15 Jul 2014
Posts: 237
Location: Huntington Beach, Ca.
 
Hooked
Vespa GTV250:: Et4 150
Joined: 15 Jul 2014
Posts: 237
Location: Huntington Beach, Ca.
Mon Aug 25, 2014 4:09 pm linkquote
couldn't they just cut the brake cable ????
⬆️    About 2 months elapsed between posts    ⬇️
Tue Nov 04, 2014 11:16 am

Member
Joined: 13 Oct 2014
Posts: 6
Location: Halifax, NS, Canada
 
Member
Joined: 13 Oct 2014
Posts: 6
Location: Halifax, NS, Canada
Tue Nov 04, 2014 11:16 am linkquote
Any updates on GripLock cons?
I am interested in purchasing this product but I have noticed some important cons from this thread. Can anyone who has used this product provide some updates on these issues? I am deciding between this and a disc lock. Thanks.

- Cutting the brake cable and rolling the scooter away
- Sliding the Grip Lock off the end of the handlebar
- Improper fit? (Handlebars too fat)
- Breaking off locking cylinder with impact
- Picking lock cylinder (round key like old Kryptonite)
Tue Nov 04, 2014 4:26 pm

Hooked
Joined: 14 May 2009
Posts: 238
Location: CANADA
 
Hooked
Joined: 14 May 2009
Posts: 238
Location: CANADA
Tue Nov 04, 2014 4:26 pm linkquote
I use the built-in ignition lock, a yellow Grip Lock and I also have a yellow Mini Grip lock. So far so good.
Tue Nov 04, 2014 5:38 pm

Hooked
GT200l
Joined: 01 May 2014
Posts: 204
Location: San Francisco, CA USA
 
Hooked
GT200l
Joined: 01 May 2014
Posts: 204
Location: San Francisco, CA USA
Tue Nov 04, 2014 5:38 pm linkquote
Does the grip lock hold the lever in the engaged position?
Tue Nov 04, 2014 7:50 pm

Veni, Vidi, Posti
2020 Honda NC750DCT ABS
Joined: 06 Feb 2006
Posts: 6829
Location: Maple Grove, MN
 
Veni, Vidi, Posti
2020 Honda NC750DCT ABS
Joined: 06 Feb 2006
Posts: 6829
Location: Maple Grove, MN
Tue Nov 04, 2014 7:50 pm linkquote
Anything can be hacked. The grip lock just makes it tough, that's the goal.


Really, this tread is 9 years old!
⬆️    About 1 year elapsed between posts    ⬇️
Fri Oct 30, 2015 9:01 am

Member
2014 Vespa GTV300
Joined: 08 Jul 2012
Posts: 7
Location: Dayton
 
Member
2014 Vespa GTV300
Joined: 08 Jul 2012
Posts: 7
Location: Dayton
Fri Oct 30, 2015 9:01 am linkquote
This might not be the best place to ask, but....
I have one of these griplocks and love it. Unfortunately, I've lost the keys for it. Yes, I know it was stupid to lose them both.
Does anyone know how the hell I can get this thing off my bike without totally destroying my handlebar?
Fri Nov 06, 2015 11:24 am

Member
'07 MP3 250; '04 Zuma 70cc, kitted, '84 CT 110
Joined: 22 Sep 2014
Posts: 38
Location: Anniston, AL
 
Member
'07 MP3 250; '04 Zuma 70cc, kitted, '84 CT 110
Joined: 22 Sep 2014
Posts: 38
Location: Anniston, AL
Fri Nov 06, 2015 11:24 am linkquote
Re: This might not be the best place to ask, but....
Arsha wrote:
I have one of these griplocks and love it. Unfortunately, I've lost the keys for it. Yes, I know it was stupid to lose them both.
Does anyone know how the hell I can get this thing off my bike without totally destroying my handlebar?
1. There is often a code of numbers and letters on a lock face. Call the company and give them that code and they can send you a new set of keys. I don't know if this company will do that or not.

2. Pick the lock. It's not that hard, and youtube has tutorials on it.

3. Take the brake lever off the master cylinder, then slid the grip off the handlebar. That will be harder than picking the lock.

4. Take a 4-5 inch grinder to the lock and just cut it in half. Cover the bike with a sheet or tarp to keep from spraying grinding cuttings all over it. Yes, it will ruin your lock, but the bar will be fine.
⬆️    About 4 months elapsed between posts    ⬇️
Sat Feb 27, 2016 5:45 pm

Ossessionato
2015 GTS 300 Super (Melody)
Joined: 22 Apr 2015
Posts: 3005
Location: Asbury Park, NJ
 
Ossessionato
2015 GTS 300 Super (Melody)
Joined: 22 Apr 2015
Posts: 3005
Location: Asbury Park, NJ
Sat Feb 27, 2016 5:45 pm linkquote
Grip-Lock: My take
I've been using the Grip-Lock for several months now, between a warm Autumn and the better part of a typical Northeast Winter, so I think I'm ready to weigh in on its overall usefulness.

For starters, the thing feels rock-solid: the plastic/resin outer casing is a serious bit of work that wasn't skimped on. The thing to remember is that this is hardly the main line of defense, as there are a series of hardened-steel bars ready to handle whatever the outer casing can't.

It's a good thing that outer casing is there, too: It makes handling the thing in subfreezing weather a hell of a lot more pleasant than metal. It also does its bit in keeping the lock reasonably light. In fact, it's weight and size are close to ideal for me - I can fetch the lock from the glove box and position it over the throttle-grip and brake lever almost literally single-handed, only needing my second hand to squeeze the lever to fit the lock completely over to secure everything. Removing the lock is totally single-handed: insert the key, turn to unlock, turn the key back to remove (a nice feature in and of itself), open the lock to remove, close again, then put back in the glove box.

And, about storage: I could almost swear the person designing this is a Vespa freak, because the Grip-Lock seems almost custom-made to fit in the GTS' glove box (right-side-only if your GTS is an ABS/ASR model). It's a perfect fit, and won't rattle around if you hit any rough stuff on your ride.

I'll go out on a limb and say that a decent security system that's so easy to use and carry that you'll use it every time you ride out beats a potentially better system that's so cumbersome to use that you might be tempted to skip it every once in a while. For me, the Grip-Lock is ridiculously easy to carry and use, so there's no excuse not to use it, even on a "short" ride.

Oh, yes: Besides the better-not-steal-me deterrence factor of its visibility, there's what I call the Mall Factor: I frequently park in shopping mall lots, and I sometimes worry a bit about someone who's desperately searching for a place to park, spots my bike, and decides then and there that my little machine occupying a parking space is somehow "wrong." (While my adopted city of Asbury Park does the right thing by providing lots of PTW-specific parking on many blocks, the same can't be said of the several nearby malls in adjoining townships.) While the GTS' Immobilizer would do an okay job of not allowing said person from steering my bike any-which-way, by locking the front brake the Grip-Lock makes sure that person can't roll the bike at all. It's not always about somebody trying to make off with your wheels.

For me, I give the Grip-Lock 9/10.
⬆️    About 1 year elapsed between posts    ⬇️
Tue Feb 14, 2017 12:51 pm

Hooked
Joined: 11 Dec 2016
Posts: 108
Location: Kuala Lumpur
 
Hooked
Joined: 11 Dec 2016
Posts: 108
Location: Kuala Lumpur
Tue Feb 14, 2017 12:51 pm linkquote
I have one. It gives me a peace of mind when I park my vespa out of my sight.

Good quality. Highly recommended. And it's made in New Zealand. So it's nothing like any other China made theft prevention products.
  DoubleGood Vespa T-Shirts  

All Content Copyright 2005-2021 by Modern Vespa. All Rights Reserved.

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

Shop on Amazon Smile with Modern Vespa

[ Time: 0.0282s ][ Queries: 5 (0.0076s) ][ Debug on ][ 209 ][ Thing One ]