OP
Sat, 10 Jul 2021 15:22:56 +0000
Lurker
Piaggio mp3 300
Joined: Sat, 10 Jul 2021 15:01:35 +0000 Posts: 1 Location: Norway
|
OP
Lurker
Piaggio mp3 300
Joined: Sat, 10 Jul 2021 15:01:35 +0000 Posts: 1 Location: Norway
|
Sat, 10 Jul 2021 15:22:56 +0000
quote
Is it any possibility of chip tuning this bike? Or any other possibility to increase the power in any other way?
I have just bought a mp3 300 bike and want to get some more power from the bike.
Does anyone know if it is possible and if yes who do I contact?
|
Sat, 10 Jul 2021 18:03:06 +0000
Addicted
2015 MP3 500 ie Business
Joined: Tue, 29 Oct 2019 17:22:26 +0000 Posts: 937 Location: Belgium
|
Addicted
2015 MP3 500 ie Business
Joined: Tue, 29 Oct 2019 17:22:26 +0000 Posts: 937 Location: Belgium
|
Sat, 10 Jul 2021 18:03:06 +0000
quote
It is possibly to chip tune them, BUT how much extra do you expect to get from such a little lump? Besides, chip tuning almost always causes extra engine wear and fuel consumption.
If you're only after 1 or 2 extra ponies, then you're better off getting a good exhaust like a Akrapovic.
|
Sat, 10 Jul 2021 18:39:51 +0000
Ossessionato
Gilera Fuoco 500ie
Joined: Sun, 11 Oct 2009 13:35:31 +0000 Posts: 4417 Location: Netherlands Olst
|
Ossessionato
Gilera Fuoco 500ie
Joined: Sun, 11 Oct 2009 13:35:31 +0000 Posts: 4417 Location: Netherlands Olst
|
Sat, 10 Jul 2021 18:39:51 +0000
quote
a exhaust won't give more then 0.2 HP to get the promised 2 hp you need to do a lot more like flown the head other intake andd stuff like that
yes its possible you will gain a bit, about 28hp on the crankshaft 22 on the rear wheel better option is buying a wrecked Front demaged Beverly 350 or X10 swap the engine and other stuff then you will have 32hp on the crank
|
Sat, 10 Jul 2021 20:19:16 +0000
Hooked
2013 MP3 300ie
Joined: Fri, 24 Nov 2017 21:51:05 +0000 Posts: 100 Location: Netherlands
|
Hooked
2013 MP3 300ie
Joined: Fri, 24 Nov 2017 21:51:05 +0000 Posts: 100 Location: Netherlands
|
Sat, 10 Jul 2021 20:19:16 +0000
quote
Best bet is to fix the CVT first.
With a small engine like the 300, you'll waste a very noticable amount of power whenever the CVT can't keep RPM between 7000 and 7500 at full throttle - which, in the OEM setup, happens quite often..
For my 300, installing dr. Pulley sliders instead of the OEM rollers made a big difference.
(If these sliders wouldn't be available anymore, some day, i'd have to upgrade to a larger bike, since the OEM setup just doesn't cut it for me )
|
Wed, 10 Aug 2022 18:52:12 +0000
Lurker
Joined: Wed, 10 Aug 2022 18:50:41 +0000 Posts: 2
|
Lurker
Joined: Wed, 10 Aug 2022 18:50:41 +0000 Posts: 2
|
Wed, 10 Aug 2022 18:52:12 +0000
quote
Did you bought Dr.pulley for Hpe 300 Mp3 engine? 2019-2021 model? And if yes which dr pulley? what kind of roller and weight? What did you gain?Lost? Thanks
|