Hi I have a 2013 piaggio mp3 300 youban. Today whilst riding it cut out & the red warning light came on. It would not fire up. I found it had blown the fuse for the stabiliser lock.
Any idea why this happened? Thanks
OP
|
Mon, 11 Apr 2022 22:23:24 +0000
quote
Hi I have a 2013 piaggio mp3 300 youban. Today whilst riding it cut out & the red warning light came on. It would not fire up. I found it had blown the fuse for the stabiliser lock.
Any idea why this happened? Thanks |
Molto Verboso
2015 MP3 500 ie Business
Joined: Tue, 29 Oct 2019 17:22:26 +0000
Posts: 1005 Location: Belgium |
OP
|
Tue, 12 Apr 2022 21:57:44 +0000
quote
The tilt lock light on the right side of the dash panel.
Once it has cut out the bike does nothing until the fuse is changed. As soon as its changed it starts up again but doesn't run for long before it blows the fuse again & cuts out?? |
Molto Verboso
2015 MP3 500 ie Business
Joined: Tue, 29 Oct 2019 17:22:26 +0000
Posts: 1005 Location: Belgium |
Wed, 13 Apr 2022 02:32:22 +0000
quote
Sounds like you have a short to ground causing the fuse to blow.
|
OP
|
Wed, 13 Apr 2022 17:40:02 +0000
quote
Yes would seem so but cannot find the problem. Have taken all the panels off to look but no joy so far 😕
![]() |
OP
|
Fri, 29 Apr 2022 22:36:02 +0000
quote
Found that the header tank had a couple of tiny leaks. Replaced the tank & so far its running OK...
Other than still won't rev with tilt lock on. It has to be double clicked to make it work 🤦♀️ |
![]() Sat, 30 Apr 2022 00:38:47 +0000
Veni, Vidi, Posti
Neutrino MP3 492.7 AK, 2013 Moto Guzzi Norge
Joined: Sun, 30 Mar 2008 04:38:24 +0000
Posts: 22186 Location: Harriman, Tennessee, Tn |
|
Veni, Vidi, Posti
![]() Neutrino MP3 492.7 AK, 2013 Moto Guzzi Norge
Joined: Sun, 30 Mar 2008 04:38:24 +0000
Posts: 22186 Location: Harriman, Tennessee, Tn |
Sat, 30 Apr 2022 00:38:47 +0000
quote
Royh wrote: Other than still won't rev with tilt lock on. It has to be double clicked to make it work 🤦♀️ |
OP
|
Sat, 07 May 2022 16:15:39 +0000
quote
OK thank you but I thought it should come on automatically when you pull up at a junction I didn't realise you had to switch it on manually. Should it go off automatically when you set off? I have to click mine off. Is this correct?
Thank you |
Hooked
![]() 2009 MP3 400, 2004 Honda ST1300
Joined: Mon, 11 Jun 2007 14:12:30 +0000
Posts: 410 Location: Sayre, PA |
Sat, 07 May 2022 22:29:53 +0000
quote
Not quite smart enough to turn on automatically. Too many variables.
Should turn off when you pull away. Sounds like there is a problem with your seat switch. |
Member
2008 MP3 250ie and 2009 MP3 Sport 500 (Gilera Fuoco)
Joined: Thu, 31 Mar 2022 06:33:54 +0000
Posts: 33 Location: WA, USA |
OP
|
Sun, 08 May 2022 21:24:48 +0000
quote
Thank you
I've tried disconnecting and bypassing the seat switch but neither made any difference. The fuse problem was solved by changing the leaking header tank. The spraying water onto the electrics seemed to be causing the problem |
Moderaptor
![]() The Hornet (GT200, aka Love Bug) and 'Dimples' - a GTS 300
Joined: Sun, 26 Aug 2007 20:16:15 +0000
Posts: 42294 Location: Pleasant Hill, CA |
Sun, 08 May 2022 21:37:31 +0000
quote
Royh wrote: Thank you I've tried disconnecting and bypassing the seat switch but neither made any difference. The fuse problem was solved by changing the leaking header tank. The spraying water onto the electrics seemed to be causing the problem |
OP
|
Wed, 08 Jun 2022 22:00:07 +0000
quote
OK thank you. I didn't realise that. I did just jump across it.
Where can I get a new sensor from? |
Hooked
![]() 2009 MP3 400, 2004 Honda ST1300
Joined: Mon, 11 Jun 2007 14:12:30 +0000
Posts: 410 Location: Sayre, PA |
Modern Vespa is the premier site for modern Vespa and Piaggio scooters. Vespa GTS300, GTS250, GTV, GT200, LX150, LXS, ET4, ET2, MP3, Fuoco, Elettrica and more.