Modern Vespa

Is it possible to transport a 1963 Vespa in a wagon if it fits? Does it need to be transported standing?
Please help!
Thanks so much!

Everything is possible. Remember "Do or do not, there is no try".

Haha ,does your wagon have a hitch?

V oodoo transported scoots in a VW GTI.
Maybe he will share the picture here. Pretty cool what that guy comes up with!

Not yet. I am planning to install one soon. I will cushion the back of the car to make sure that nothing bends...

Just lay it down. You will need someone up front to pull it in.

I did my lammy in a 7series volvo and had plenty of room.

Didn't any thing leak?

Well, don't be a dummy and transport with a full tank of gas.

I drained about most of it and my cap is secure.

Yah I transported a bike in a big trunk when I was 12,had too much gas in it !

Thanks soooo much!!!

Drain the oil too. I'd just take an 11 mm wrench & remove the gas tank - if the smell gets in there ...
That's what I like about Golfs, take out the seats & transport standing up, don't drain nuthin'.



Lots of pics with a smallie in there, here's the COSA going in, ass first thru the front door. A 2 door would be easier.

Haha , if you valet park with a vespa in your car,you might a red neck,lol

Epic!

If you have a 5, it should go right in. You might have to pull the front wheel off to get it in a 3, but that's a snap. I brought mine home in a V50, along with lots of spares, including another motor. The front wheel was already off, but I'm pretty sure it would have gone in assembled. I don't have a pic of it uncovered, but you can make out the left handgrip on the left, and the front hub on the right (next to the wheel with the drum).

ive fittted a px in a daewoo lanos hatchback and a sprint in a mazda 121 bubble



and a rally in a morris 1100 but the rally was cheating it was in pieces




got an old landcruiser now makes things easier