Modern Vespa

right then im working on me bits for the bastardisation of the t5 .... im going slight cut with maybe full leggies ... wasnt gonna share yet but im stuck...

indicators welded up ...
led bar ends [if i can get them to work without blowing]....
small rear indicators peeping from under the rear panels ...
panel toolbox ...
leggy spare holder ...
ancillotti seat....
fake distressed paint made of four layers of primer.....
left hand pipe...

the thing is huggers look shite with full legshields ... i dont want a t5 horncover as the bull has one so im leaning towards a trimmed t5 muddy with efl horncover ... i know ive said this is just wrong but im stuck for ideas n i think it might be ok on this un .... what ya think

gp muddy and a light trim leggies



otherwise yep t5 muddy cut




and how would you like around the ears

no lammy bits are touching this un

The mk1 p horn covers are quite smart looking bitsa.

its just a 90s efl ..... like a 90s t5 classic one .... ive got one in me shed ..... tryin not to spend too much ...... keeping floor mats too

Bung up a list of stuff you need. Ill see I have anything you need

10" leggy spare holder ....... toolbox panel ...... haha

cut like this mate



nor this



have fun on the bastard and cheer

wasnt gonna cut the floor so i could keep the mats but that might just have to change ...........

B.. I was looking at mine and visualizing some possibilities... I think you should cut the leg shield in just to the inside edge of where the signals Would have been or however far you want to go, straight down on both sides.. no round out.. and then very smoothly have it flare out just along the top edge of the floor rails matching the angle that the 3 staggered rails make, so it ends up coming back to regular width for the floor.... if I ever cut my P I'm going to do this..

naa i cut the bitza on the inside of the indicators n want something different this time ... n dont like the floor wider than the bottom of the leggies ....
keep the ideas flowing though

Coffin?

hmmm not bad ..... but what trim would i use??

garden hose

Out of left field I know but what about a mudguard something along the lines of the Bianchi Orsetto (Raleigh Roma) or, more up to date, the Husqvarna Nuda?

Ditto on the COFFIN!
Just get some cheap black rubber trim.
Cut it a bit at the corners, so it will bend to a straight angle matching the coffin shape.

Or don't use any trim. That extra weight will slow you down!

http://www.sip-scootershop.com/en/products/legshield+trim+_90505000

SIP do a thick one. I had it on a scoot before

I used this on the edge of my smallframe

http://www.ebay.com/itm/170979687949?hlp=false&var=

Continued it allong the edge of the floorboards all the way to the back (bodge style )

Hey guys,
Speaking of leg shield trim...
I'm going to use "Windlace" on my leg shield. It's readily available from National Parts Depot (NPD).
http://www.npdlink.com/store/catalog/Mustang_Windlace-305-1.html

This vendor supply's a lot of my mustang resto stuff. It's typically used on exposed metal edges on autos. With my silver I'm going to, most likely, go with black, as it will match my other rubber trim.
BTW, it's available in black, dark blue, white, red, and ivy green, as I recall.

+1 in the coffin shape. That would be dope.

think coffin would work with a coffin tank but on its own it wouldnt look right unless ya stood directly iinfront of it .... it looks good as a 2d but its got alot of shape to the leggies ...

im thinking minimal cut around the top edge n standard trim on pulled down lower ... summat like this un .... still unsure ...
the bitza was easy as i knew what i liked n wanted in a late 80s style ... now im after a late 90s style cut .. more minimal with hidden lights

it's not much of a cutdown, but it IS a nice shape.. put some lammy trim on and call it a DL. That shape would flow nicely with some Slight drops..

Its a fine shape to that one bitsa.

Thats what I was thinking about doing some day, something like the 90ss.

Also, is that an Iron Man theme bike?

he says its not iron man themed ... he just forgot to get the horncover painted ... i say bollox its iron man ...
im not after something ott just a sweet cut n a raggy paintjob

there was a vespa rear light that was about the size of a packet of 10 cigs ... anyone know what it was on??? .... i need something small n cool as sip tunnels are not available

Rig an indicator housing mounted sideways. Maybe stack them one for breaklight one for running light

I believe that was an allstate tail light...

I'm sure someone here has one lying around, but also...

http://www.scooterworks.com/taillight-assembly--allstate-vespa-products-3142.php#.UkzSMmSgmLM

fuck ive seen that done jacko ...... why did i not think of that ..... i not using me indicators