Making a wooden scooter lift
Post Reply    Forum -> Project Reports
Author Message
2020 Piaggio Liberty 150
Joined: 14 Dec 2020
Posts: 3
Location: Peacham, Vermont
Sat Mar 20, 2021 8:58 am quote
These scooters are under 400 lbs mostly...I'd like to find a plan for a scooter lift that can be put up against a wall when not in use...thank you from northern vermont where the snow is not melting quick enough to get the rig out of the cellar...put a lot of time on it down there...
GTS 300ie Touring - Signora D'argento
Joined: 03 Jun 2018
Posts: 776
Location: Limassol, Cyprus
Sun Mar 21, 2021 1:47 am quote
I was considering buying this one, although it looks like quite a steep ramp to get your scooter onto the table. I like the idea that the ramp converts into a seating bench......

There's also an old thread from some DIY projects.....

DIY Work Bench/Ramp

Molto Verboso
2006 LX150 (carbed) | 2007 GT200
Joined: 29 Jun 2016
Posts: 1267
Location: Toronto
Sun Mar 21, 2021 2:23 am quote
Here's one designed to be stacked aside:
My DIY Knock-Down Work Stand

Welcome to Modern Vespa!
  DoubleGood Vespa T-Shirts  
Post Reply    Forum -> Project Reports
[ Time: 0.0365s ][ Queries: 26 (0.0203s) ][ Debug on ][ Thing Two ]