Is there a spare part manual for this model?
Post Reply    Forum -> Not-So-Modern
Author Message
Enthusiast
150 Super 1978
Joined: 19 Jun 2016
Posts: 53
Location: Far East
Wed Nov 25, 2020 6:16 am quote
Hello!

I found these catalogues but they don't cover the model that I have:

https://www.scooterhelp.com/serial/VBC.VLB.VNC.parts.book.html

Mine is a 150 Super from '78 so it has significant differences in the engine assembly than the earlier models that is covered by the catalogue above.

Do you have any link for any parts book that covers my scooter model?
Moderator
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4852
Location: Hustletown, TX
Thu Nov 26, 2020 11:26 am quote
Iím unsure of the differences on a 78 super motor versus the earlier iterations?

Maybe the oil diverter? Gear selector bearing being closed? Kickstart spring?

I would just buy the Haynes manual manual for a P series. Changes I would think would be so similar to the Ps that you should be well sorted. Comparing the 2.
Enthusiast
150 Super 1978
Joined: 19 Jun 2016
Posts: 53
Location: Far East
Thu Nov 26, 2020 11:22 pm quote
Actually it's a mix between a Super and a P.

It's like some "best of both worlds" ☺️

For example I have to install a P series crankset and flywheel.
Moderator
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4852
Location: Hustletown, TX
Fri Nov 27, 2020 7:41 am quote
Yeah , sorry I wasn't clear...

What I was trying to communicate is that the differences are so minor that all you need to do is get the Haynes manual for the P or even just the parts/schematic for a P125/P150 for any discrepancies you come across.
Enthusiast
150 Super 1978
Joined: 19 Jun 2016
Posts: 53
Location: Far East
Sat Nov 28, 2020 4:00 am quote
I'm confused about the clutch gear teeth count. Because it's different for Super and for the P models.
  DoubleGood Vespa T-Shirts  
Post Reply    Forum -> Not-So-Modern
[ Time: 0.0619s ][ Queries: 31 (0.0423s) ][ Debug on ][ Thing Two ]