OP
Tue, 19 Apr 2022 14:24:25 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Tue, 19 Apr 2022 14:24:25 +0000 quote
chandlerman wrote:
But officer! It's just a little 50 Special. It doesn't even go that fast!


When I get pulled over just for a "legal" check (driving license, insurance, papers), most of times I get asked about the noise my P makes. I say: "Well, it passed its MOT and plus, it's a 40 years old scooter, what do you expect??"
Tue, 19 Apr 2022 15:14:21 +0000

Nedminder
62 VBB1T Round Tail W/ leaner sidecar
Joined: Sat, 26 Jan 2019 09:50:15 +0000
Posts: 3555
Location: california
 
Nedminder
62 VBB1T Round Tail W/ leaner sidecar
Joined: Sat, 26 Jan 2019 09:50:15 +0000
Posts: 3555
Location: california
Tue, 19 Apr 2022 15:14:21 +0000 quote
Quote:
it's a 40 years old scooter, what do you expect??"
Κύριε, περιμένω να έχει 4 ίππους
Tue, 19 Apr 2022 15:18:22 +0000

Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
 
Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
Tue, 19 Apr 2022 15:18:22 +0000 quote
charlieman22 wrote:
Κύριε, περιμένω να έχει 4 ίππους
OP
Tue, 19 Apr 2022 17:40:01 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Tue, 19 Apr 2022 17:40:01 +0000 quote
charlieman22 wrote:
Κύριε, περιμένω να έχει 4 ίππους
Dude! You killed me!
OP
Tue, 19 Apr 2022 18:55:50 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Tue, 19 Apr 2022 18:55:50 +0000 quote
Almost there. Timed and jetted (will probably need re-jetting). Had to make a custom speedo cable. I thought I needed to shorten the original one, but I actually needed a very long one. I had an ET4 speedo cable which I cut to length and then had re-pressed by a nearby shop specializing in speedometers & cables, the ends taken from the V50 cable. What's left is to bleed the front brake and finish with the headset. Hopefully till Saturday...































Wed, 20 Apr 2022 08:43:29 +0000

Hooked
PX
Joined: Sun, 07 Feb 2016 16:34:33 +0000
Posts: 305
Location: Switzerland
 
Hooked
PX
Joined: Sun, 07 Feb 2016 16:34:33 +0000
Posts: 305
Location: Switzerland
Wed, 20 Apr 2022 08:43:29 +0000 quote
Looks Fantastic…..
Well Done… 👍
Wed, 20 Apr 2022 12:18:55 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Wed, 20 Apr 2022 12:18:55 +0000 quote
Dream scoot!!
Wed, 20 Apr 2022 18:06:11 +0000

Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
 
Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
Wed, 20 Apr 2022 18:06:11 +0000 quote
That turned out soooo fine. Well done indeed.
OP
Wed, 20 Apr 2022 19:35:13 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Wed, 20 Apr 2022 19:35:13 +0000 quote
Thanks Gents!

And.... Another crazy setback...

Brand new BGM fuel tap not drilled...

Wed, 20 Apr 2022 21:51:42 +0000

bodgemaster
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: Thu, 26 Sep 2013 22:01:08 +0000
Posts: 6695
Location: So Cal
 
bodgemaster
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: Thu, 26 Sep 2013 22:01:08 +0000
Posts: 6695
Location: So Cal
Wed, 20 Apr 2022 21:51:42 +0000 quote
Another pro build. You definitely know how to put em together, Chris.
Wed, 20 Apr 2022 23:42:54 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Wed, 20 Apr 2022 23:42:54 +0000 quote
SaFiS wrote:
Thanks Gents!

And.... Another crazy setback...

Brand new BGM fuel tap not drilled...


Yeah I'd be looking at other fuel taps to be honest…

KR automation perhaps? Lol


The last word in fuel taps…

Thu, 21 Apr 2022 03:25:35 +0000

Banned
2:6
Joined: Fri, 12 Jan 2007 02:38:46 +0000
Posts: 8483
Location: San Francisco
 
Banned
2:6
Joined: Fri, 12 Jan 2007 02:38:46 +0000
Posts: 8483
Location: San Francisco
Thu, 21 Apr 2022 03:25:35 +0000 quote
108 wrote:
KR automation perhaps?
where have you been all my life?
OP
Thu, 21 Apr 2022 08:31:09 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Thu, 21 Apr 2022 08:31:09 +0000 quote
108 wrote:
Yeah I'd be looking at other fuel taps to be honest…

KR automation perhaps? Lol
Never had a problem with their taps…

KR? Yeah, Nah, 150€ (tap + special nut / filter) is absurd…
Thu, 21 Apr 2022 11:24:54 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Thu, 21 Apr 2022 11:24:54 +0000 quote
Ah forgot about the tax…

Yeah that's pretty expensive.

I'd pass on the filter, but it's 3 times the price of the BGM on my side.

For pump free, worry free, don't think it's that bad…
Thu, 21 Apr 2022 15:30:15 +0000

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: Mon, 06 May 2019 08:34:14 +0000
Posts: 1542
Location: PNW from LBC
 
The Dude
Too Many piles of Junk that need too much work and too much money
Joined: Mon, 06 May 2019 08:34:14 +0000
Posts: 1542
Location: PNW from LBC
Thu, 21 Apr 2022 15:30:15 +0000 quote
Is the flow rate of KR tap that much more than others? Sure looks fancy
OP
Mon, 09 May 2022 19:53:26 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Mon, 09 May 2022 19:53:26 +0000 quote
Finishing touches. What's left to do is to setup the speedo...













Mon, 09 May 2022 20:07:10 +0000

Ossessionato
79 P200E (Ruby), 62 Allstate (B-62), 2008 Stella (Olive)
Joined: Wed, 11 Jan 2006 15:25:08 +0000
Posts: 3576
Location: Florence, OR
 
Ossessionato
79 P200E (Ruby), 62 Allstate (B-62), 2008 Stella (Olive)
Joined: Wed, 11 Jan 2006 15:25:08 +0000
Posts: 3576
Location: Florence, OR
Mon, 09 May 2022 20:07:10 +0000 quote
What a beauty!
Mon, 09 May 2022 20:27:00 +0000

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: Mon, 06 May 2019 08:34:14 +0000
Posts: 1542
Location: PNW from LBC
 
The Dude
Too Many piles of Junk that need too much work and too much money
Joined: Mon, 06 May 2019 08:34:14 +0000
Posts: 1542
Location: PNW from LBC
Mon, 09 May 2022 20:27:00 +0000 quote
Looks fast standing still . Great attention to details
Mon, 09 May 2022 20:37:44 +0000

Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
 
Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
Mon, 09 May 2022 20:37:44 +0000 quote
It's a stunner.

5 star
Mon, 09 May 2022 20:38:31 +0000

Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
 
Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
Mon, 09 May 2022 20:38:31 +0000 quote
absolutely amazing. I love it!
Mon, 09 May 2022 20:46:28 +0000

Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
 
Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
Mon, 09 May 2022 20:46:28 +0000 quote
Any trick to that fancy lock on the engine door? I was thinking of doing that on the battery door of my smallie
OP
Mon, 09 May 2022 21:04:54 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Mon, 09 May 2022 21:04:54 +0000 quote
Thanks Guys!!!
Birdsnest wrote:
Any trick to that fancy lock on the engine door? I was thinking of doing that on the battery door of my smallie
This is the lock. Just be careful when you shape the hole. Needs two flat sides...

https://www.sip-scootershop.com/en/product/lock-zadi-sidepanel_16810
Mon, 09 May 2022 21:29:07 +0000

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: Fri, 05 Apr 2013 02:54:23 +0000
Posts: 7104
Location: San Diego, CA
 
Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: Fri, 05 Apr 2013 02:54:23 +0000
Posts: 7104
Location: San Diego, CA
Mon, 09 May 2022 21:29:07 +0000 quote
did you have to do custom striping on the fender side with the bump out for the shock? Seems like a regular would end up too short due to the added length of the bump vs flat.
OP
Mon, 09 May 2022 21:36:47 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Mon, 09 May 2022 21:36:47 +0000 quote
sdjohn wrote:
did you have to do custom striping on the fender side with the bump out for the shock? Seems like a regular would end up too short due to the added length of the bump vs flat.
To my surprise, no. I even needed to trim a bit at the end to follow the rear line of the mudguard...
Tue, 10 May 2022 02:59:47 +0000

Ossessionato
P208, Stella VMC Stelvio 187, Stella 150, VNX1T, V9A1T, V9B1T, 02 Sportster XLH1208
Joined: Sat, 21 Jul 2018 00:30:56 +0000
Posts: 4075
Location: Staten Island, NY
 
Ossessionato
P208, Stella VMC Stelvio 187, Stella 150, VNX1T, V9A1T, V9B1T, 02 Sportster XLH1208
Joined: Sat, 21 Jul 2018 00:30:56 +0000
Posts: 4075
Location: Staten Island, NY
Tue, 10 May 2022 02:59:47 +0000 quote
Man you must be the best friend to a lot of guys out there. Always doing them solid favors with these amazing builds!

We need a MV NSM USA trip to Greece to see all this crazy stuff you have built!
Tue, 10 May 2022 05:53:55 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Tue, 10 May 2022 05:53:55 +0000 quote
Is that an et2 fork?

Looking into buying a Smallframe, wondering what fork options there are…

I was looking at PK forks… seem good for disc brake conversion, but not sure..

Most of them need customising right?
OP
Tue, 10 May 2022 06:15:29 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Tue, 10 May 2022 06:15:29 +0000 quote
108 wrote:
Is that an et2 fork?

Looking into buying a Smallframe, wondering what fork options there are…

I was looking at PK forks… seem good for disc brake conversion, but not sure..

Most of them need customising right?
No. Shortened and twisted PK fork. ET / newer forks are on the other side…
Tue, 10 May 2022 06:37:40 +0000

Nedminder
62 VBB1T Round Tail W/ leaner sidecar
Joined: Sat, 26 Jan 2019 09:50:15 +0000
Posts: 3555
Location: california
 
Nedminder
62 VBB1T Round Tail W/ leaner sidecar
Joined: Sat, 26 Jan 2019 09:50:15 +0000
Posts: 3555
Location: california
Tue, 10 May 2022 06:37:40 +0000 quote
Wow Safis!
That's pretty spectacular.
Just in time for the riding season.
That thing is gonna turn some heads!
Very cool build.
Tue, 10 May 2022 09:28:56 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Tue, 10 May 2022 09:28:56 +0000 quote
SaFiS wrote:
No. Shortened and twisted PK fork. ET / newer forks are on the other side…
Twisted because the mudguard hits the leg shield?
OP
Tue, 10 May 2022 12:19:01 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Tue, 10 May 2022 12:19:01 +0000 quote
108 wrote:
Twisted because the mudguard hits the leg shield?
No. It's to compensate the offset the PX disc carrier brings to a PK fork. That way the wheel is centered and not to the left…
Tue, 10 May 2022 12:42:26 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Tue, 10 May 2022 12:42:26 +0000 quote
SaFiS wrote:
No. It's to compensate the offset the PX disc carrier brings to a PK fork. That way the wheel is centered and not to the left…
Ah, got you…

Not sure how and where you would "twist" it (and which way) but got you on the offset
OP
Tue, 10 May 2022 12:50:01 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Tue, 10 May 2022 12:50:01 +0000 quote
108 wrote:
Ah, got you…

Not sure how and where you would "twist" it (and which way) but got you on the offset
It was done before welding…



Tue, 10 May 2022 13:04:47 +0000

Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
 
Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
Tue, 10 May 2022 13:04:47 +0000 quote
For anyone still struggling, here's one of my increasingly infamous explanatory drawings...


Don't hate the artist, hate the art.

Tue, 10 May 2022 13:27:28 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Tue, 10 May 2022 13:27:28 +0000 quote
chandlerman wrote:
For anyone still struggling, here's one of my increasingly infamous explanatory drawings...
I'm a fan of the artist, but can't make headway on the masterpiece…

Do I turn it upside down to look at it lol??

Joking aside, kinda get safis, but how do you figure out how much to turn it to correct the offset…

CM, another drawing perhaps??
OP
Tue, 10 May 2022 13:31:41 +0000

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
 
OP
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: Sun, 02 Aug 2015 18:39:51 +0000
Posts: 3506
Location: Veria, Greece
Tue, 10 May 2022 13:31:41 +0000 quote
108 wrote:
I'm a fan of the artist, but can't make headway on the masterpiece…

Do I turn it upside down to look at it lol??

Joking aside, kinda get safis, but how do you figure out how much to turn it to correct the offset…

CM, another drawing perhaps??
Eye balling and a laser…
Tue, 10 May 2022 14:00:20 +0000

Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
 
Not So Moderator
VNB VSC o9c VMA vbc vmb VSX
Joined: Wed, 28 May 2008 17:31:07 +0000
Posts: 6929
Location: Hustletown, TX
Tue, 10 May 2022 14:00:20 +0000 quote
Damn... Didn't know you were the Banksy of Tennessee CM.
Tue, 10 May 2022 14:01:25 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Tue, 10 May 2022 14:01:25 +0000 quote
Birdsnest wrote:
Damn... Didn't know you were the Banksy of Tennessee CM.
I see bread rolls
Tue, 10 May 2022 14:16:35 +0000

Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
 
Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
Tue, 10 May 2022 14:16:35 +0000 quote
Birdsnest wrote:
Damn... Didn't know you were the Banksy of Tennessee CM.
Shhhhh! The schtick only works if there's mystery about who I am!

And as bad stylistic as my artwork might be, it usually gets at least most of the point across.
Tue, 10 May 2022 14:17:08 +0000

Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
 
Lucky
76 Sprint V, 63 GL, 62 VBB, 05 Stella, 66 Smallstate, 08 Stella (for now)
Joined: Thu, 16 Jun 2011 14:59:35 +0000
Posts: 7532
Location: Nashville
Tue, 10 May 2022 14:17:08 +0000 quote
108 wrote:
I see bread rolls
I had to add the legshield to the top drawing or you'd have been seeing something else entirely.
Tue, 10 May 2022 15:19:17 +0000

Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

 
Molto Verboso
PX 200
Joined: Wed, 25 May 2016 16:14:28 +0000
Posts: 1315

Tue, 10 May 2022 15:19:17 +0000 quote
chandlerman wrote:
I had to add the legshield to the top drawing or you'd have been seeing something else entirely.
Lol
  DoubleGood Design  

Modern Vespa is the premier site for modern Vespa and Piaggio scooters. Vespa GTS300, GTS250, GTV, GT200, LX150, LXS, ET4, ET2, MP3, Fuoco, Elettrica and more.


Shop on Amazon with Modern Vespa

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

All Content Copyright 2005-2023 by Modern Vespa. All Rights Reserved.

[ Time: 0.0941s ][ Queries: 6 (0.0672s) ][ Debug on ][ 276 ][ Thing Two ]