Mon May 10, 2021 8:55 pm

bodgemaster
63 GL, 76 Super (x 2), 74 Primavera (x 2), 06 Fly 150
Joined: 26 Sep 2013
Posts: 5920
Location: So Cal
 
bodgemaster
63 GL, 76 Super (x 2), 74 Primavera (x 2), 06 Fly 150
Joined: 26 Sep 2013
Posts: 5920
Location: So Cal
Mon May 10, 2021 8:55 pm linkquote
We all have one. The Craftsman 3/8” flexhead stubby is the one I usually reach for.



Tue May 11, 2021 5:57 am

Style Maven
74 50s x3 78 P200 x2 84 Cosa PK50XL2 58 AllState 68 Sprint 80 50special '66(?) Super125
Joined: 22 Nov 2010
Posts: 8202
Location: seattle/athens
 
Style Maven
74 50s x3 78 P200 x2 84 Cosa PK50XL2 58 AllState 68 Sprint 80 50special '66(?) Super125
Joined: 22 Nov 2010
Posts: 8202
Location: seattle/athens
Tue May 11, 2021 5:57 am linkquote
Well Mike, you asked for it and you get more than you wanted, but I just got done sorting all my favorite tools after finally arriving in Greece. So I may be offering up a little more than allowed?...


Here are the ratchets, a dependable Craftsman w/ the nice thumbwheel and fine resolution too for 3/8". For quarter inch I have a miniature Craftsman and this one that rides with me- sockets in handle and detachable mini finger wheel. Also nice flex e


But my first choice is always my 8, 10, 11 and 13mm T handles , I can usually get stuff loose and it's hard to overtorque and bust stuff when tightening with them.


These are my second choice over ratchet and sockets, but my 10mm is hiding at the moment. All of these are duplicates and stay here for my family to use...


Anyway, these are my favorites that always come and go with me, can you guess what they all are?

Except for that wicked switchblade knife which I just purchased at the street market and is going home with me, heh heh...

Tue May 11, 2021 6:04 am

El Presidente Del Topo Chico
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4969
Location: Hustletown, TX
 
El Presidente Del Topo Chico
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4969
Location: Hustletown, TX
Tue May 11, 2021 6:04 am linkquote
Whats the Santa Clause kazoo looking thingy?
Tue May 11, 2021 6:16 am

Ossessionato
BV350, Primavera 150, Yamaha Zuma 125
Joined: 06 Jun 2013
Posts: 3332
Location: The Twin Cities of Minneapolis/Saint Paul, Minnesota
 
Ossessionato
BV350, Primavera 150, Yamaha Zuma 125
Joined: 06 Jun 2013
Posts: 3332
Location: The Twin Cities of Minneapolis/Saint Paul, Minnesota
Tue May 11, 2021 6:16 am linkquote
Birdsnest wrote:
Whats the Santa Clause kazoo looking thingy?
Well, if it isn't a beer bottle opener it should be.
Tue May 11, 2021 6:23 am

El Presidente Del Topo Chico
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4969
Location: Hustletown, TX
 
El Presidente Del Topo Chico
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4969
Location: Hustletown, TX
Tue May 11, 2021 6:23 am linkquote
JKJ-FZ6 wrote:
Well, if it isn't a beer bottle opener it should be.
Was hoping it was krumpus shiv or another switch blade? ho ho ho
Tue May 11, 2021 7:10 am

Style Maven
74 50s x3 78 P200 x2 84 Cosa PK50XL2 58 AllState 68 Sprint 80 50special '66(?) Super125
Joined: 22 Nov 2010
Posts: 8202
Location: seattle/athens
 
Style Maven
74 50s x3 78 P200 x2 84 Cosa PK50XL2 58 AllState 68 Sprint 80 50special '66(?) Super125
Joined: 22 Nov 2010
Posts: 8202
Location: seattle/athens
Tue May 11, 2021 7:10 am linkquote
That would be the inductive current tester, a very handy device. Also seen here are favorites including a small LED I can that blinks in points ignitions at the coil lead if the points, stator and flywheel are good. A TrailTech CHT, a FW puller, a homemade clutch nut tool, an inner tube valve extractor, soccer ball inflator and sharp skinny scissors alongside flexy stainless steel paring knife with JUST the right tip. Then aforementioned vicious switchblade, strictly for self defense!



Tue May 11, 2021 7:17 am

Ossessionato
VSX, Stella 177, VNX1T, V9B1T
Joined: 20 Jul 2018
Posts: 3177
Location: Staten Island, NY
 
Ossessionato
VSX, Stella 177, VNX1T, V9B1T
Joined: 20 Jul 2018
Posts: 3177
Location: Staten Island, NY
Tue May 11, 2021 7:17 am linkquote
Excellent thread! Always awesome to see what tools others use that could potentially be very helpful.

My trusty cheapo stanley wratchet i've had for 15 years now stays in my stella glovebox permanently. Plus a couple of helpful attachments.

The rest of my permanent stella tools include specific screwdrivers that are long enough for me to mess with things without having to remove the seat rack which gets in the way of messing with the carb. I also keep my nidage borescope camera permanently in the glovebox.

I know they are not the most space efficient tools, but they work well and I have yet to find more portable tools that do the job as efficiently.

I'm always envious of those wrenches with wratchet ends that V oodoo has. Every time I'm in a hardware store I drool over them, but for some reason never shell out the money for them!





Tue May 11, 2021 7:29 am

Hooked
1958 Allstate Super Cruisaire 2005 70cc Yamaha Vino
Joined: 23 Aug 2020
Posts: 364
Location: Philadelphia
 
Hooked
1958 Allstate Super Cruisaire 2005 70cc Yamaha Vino
Joined: 23 Aug 2020
Posts: 364
Location: Philadelphia
Tue May 11, 2021 7:29 am linkquote
swiss1939 wrote:
I'm always envious of those wrenches with wratchet ends that V oodoo has. Every time I'm in a hardware store I drool over them, but for some reason never shell out the money for them!
SAME! Everytime I need a crescent wrench and the damn things just barely fit but you can't really see the nut so it just takes 45mins longer than needed and if I just splurged and grabbed the ratchet type I wouldn't be cursing for 45mins about how assinine this is.... then I'm at the hardware store and see them and say what a great idea as I walk right on past them.

One of these days I'll finally stop the self imposed frustration and get a set
Tue May 11, 2021 7:52 am

bodgemaster
63 GL, 76 Super (x 2), 74 Primavera (x 2), 06 Fly 150
Joined: 26 Sep 2013
Posts: 5920
Location: So Cal
 
bodgemaster
63 GL, 76 Super (x 2), 74 Primavera (x 2), 06 Fly 150
Joined: 26 Sep 2013
Posts: 5920
Location: So Cal
Tue May 11, 2021 7:52 am linkquote
Here ya go fellas. Everyone should have a T-handle. 3/8 or 1/4”. Your life will be complete.

https://www.motionpro.com/product/08-0359
Tue May 11, 2021 1:52 pm

Molto Verboso
2007 Stella 225
Joined: 02 Nov 2019
Posts: 1744
Location: Rochester, Minnesota
 
Molto Verboso
2007 Stella 225
Joined: 02 Nov 2019
Posts: 1744
Location: Rochester, Minnesota
Tue May 11, 2021 1:52 pm linkquote
Duralast 1/4” drive 100 tooth flex. Fits in tight spots. Like when I replaced my rear shock mount with a Clauss.



Tue May 11, 2021 2:04 pm

Ossessionato
79 P200E, 62 Allstate, 2008 Stella
Joined: 11 Jan 2006
Posts: 2165
Location: Florence, OR
 
Ossessionato
79 P200E, 62 Allstate, 2008 Stella
Joined: 11 Jan 2006
Posts: 2165
Location: Florence, OR
Tue May 11, 2021 2:04 pm linkquote
The 1/4 T handle, and the old school torque wrench


Gotta love the old school torque wrench - and everyone needs a t-handle driver...

Tue May 11, 2021 2:19 pm

El Presidente Del Topo Chico
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4969
Location: Hustletown, TX
 
El Presidente Del Topo Chico
VNB VSC VBC VSX
Joined: 28 May 2008
Posts: 4969
Location: Hustletown, TX
Tue May 11, 2021 2:19 pm linkquote
My two favs are an old school Penens with “off” and “on” labeled at the switch. And the other is an 11” craftsman that is just the right size between a utility ratchet and a breaker bar. Neither is good for the smaller stuff but definitely my two favorite to use and hold. (I do need to track down a small flex head like Mikes... definitely on the want list.)



Tue May 11, 2021 2:38 pm

Hooked
Rat 2003 Stella 2T; 1979 P125x (in pieces, out for paint)
Joined: 12 Sep 2015
Posts: 312
Location: Madtown
 
Hooked
Rat 2003 Stella 2T; 1979 P125x (in pieces, out for paint)
Joined: 12 Sep 2015
Posts: 312
Location: Madtown
Tue May 11, 2021 2:38 pm linkquote
Just ordered a Craftsman flexhead stubby...thanks for the recommendation. I hope that the rumors about new Craftsman being way worse than old Craftsman are exaggerated.
Tue May 11, 2021 2:52 pm

Ossessionato
2015 GTS300, 1974 Primavera, 04 Ninja 250
Joined: 04 Apr 2013
Posts: 4646
Location: San Diego, CA
 
Ossessionato
2015 GTS300, 1974 Primavera, 04 Ninja 250
Joined: 04 Apr 2013
Posts: 4646
Location: San Diego, CA
Tue May 11, 2021 2:52 pm linkquote
A no brand (“Crew Line”) 3/8 swivel and a Craftsman 1/4. I’m not calling all my other toys ratchets just to show off on this thread 😜



Tue May 11, 2021 3:23 pm

Molto Verboso
2007 Stella 225
Joined: 02 Nov 2019
Posts: 1744
Location: Rochester, Minnesota
 
Molto Verboso
2007 Stella 225
Joined: 02 Nov 2019
Posts: 1744
Location: Rochester, Minnesota
Tue May 11, 2021 7:18 pm

Hooked
various, but less than I used to have
Joined: 20 Aug 2012
Posts: 107
Location: San Anselmo
 
Hooked
various, but less than I used to have
Joined: 20 Aug 2012
Posts: 107
Location: San Anselmo
Tue May 11, 2021 7:18 pm linkquote
These



Tue May 11, 2021 7:32 pm

Sergeant at Arms
Weird 80's Vespas & Cool Vintage Lambrettas
Joined: 21 Oct 2005
Posts: 8909
Location: The state of insanity, SoCal
 
Sergeant at Arms
Weird 80's Vespas & Cool Vintage Lambrettas
Joined: 21 Oct 2005
Posts: 8909
Location: The state of insanity, SoCal
Tue May 11, 2021 7:32 pm linkquote
yackee wrote:
Just ordered a Craftsman flexhead stubby...thanks for the recommendation. I hope that the rumors about new Craftsman being way worse than old Craftsman are exaggerated.
The new stuff is junk, comparatively to the old. So either you jump up to high line or hope for the best. If you’re not using it day to day you’ll be alright.
Tue May 11, 2021 8:37 pm

bodgemaster
63 GL, 76 Super (x 2), 74 Primavera (x 2), 06 Fly 150
Joined: 26 Sep 2013
Posts: 5920
Location: So Cal
 
bodgemaster
63 GL, 76 Super (x 2), 74 Primavera (x 2), 06 Fly 150
Joined: 26 Sep 2013
Posts: 5920
Location: So Cal
Tue May 11, 2021 8:37 pm linkquote
@kmf - Have a little Snap-on “Midget” too ... found it at a garage sale. It’s the toothpick of ratchets!



Tue May 11, 2021 8:48 pm

Ossessionato
79 P200E, 62 Allstate, 2008 Stella
Joined: 11 Jan 2006
Posts: 2165
Location: Florence, OR
 
Ossessionato
79 P200E, 62 Allstate, 2008 Stella
Joined: 11 Jan 2006
Posts: 2165
Location: Florence, OR
Tue May 11, 2021 8:48 pm linkquote
kmf, that's a cool torque wrench! Never seen one like that...
Wed May 12, 2021 7:32 am

Addicted
'64 Motovespa 150S (177) , '66 Allstate SF, '65 VBB, '66 180SS
Joined: 27 Mar 2013
Posts: 881
Location: S.Salem, NY
 
Addicted
'64 Motovespa 150S (177) , '66 Allstate SF, '65 VBB, '66 180SS
Joined: 27 Mar 2013
Posts: 881
Location: S.Salem, NY
Wed May 12, 2021 7:32 am linkquote
Haven't used these much in the past 55 years, but they are very sentimental.



Wed May 12, 2021 3:27 pm

Hooked
2001 LML 150 2t
Joined: 16 Jul 2017
Posts: 375
Location: Queensland, Aus
 
Hooked
2001 LML 150 2t
Joined: 16 Jul 2017
Posts: 375
Location: Queensland, Aus
Wed May 12, 2021 3:27 pm linkquote
That little 1/4” Snap On ratchet will have a little symbol stamped on it somewhere to identify which year it was made which will help ordering spare parts if necessary. As far as I know they have a lifetime warranty as well - within reason of course.

Last edited by Philos on Thu May 13, 2021 8:51 pm; edited 1 time in total
Wed May 12, 2021 5:26 pm

Petty Tyrant
GTS250 GTS300 MP3 500
Joined: 11 Oct 2005
Posts: 30939
Location: Bay Area, California
 
Petty Tyrant
GTS250 GTS300 MP3 500
Joined: 11 Oct 2005
Posts: 30939
Location: Bay Area, California
Wed May 12, 2021 5:26 pm linkquote
I prefer mine on the small side.



Wed May 12, 2021 5:27 pm

Hooked
2005 Vespa PX 150
Joined: 23 Feb 2010
Posts: 286
Location: Houston, Texas USA
 
Hooked
2005 Vespa PX 150
Joined: 23 Feb 2010
Posts: 286
Location: Houston, Texas USA
Wed May 12, 2021 5:27 pm linkquote
Just for your information...
I had a 1/4 inch Craftsman ratchet that was maybe 10 years old and recently it broke.
I know Lowe's is now selling Craftsman so I took it to them to see if they would honor the lifetime warranty.
Guess what? They did!
Told me to go get one off the shelf and I found the identical model.

I realize that the quality is not what it used to be, but if they are going to honor the lifetime warranty then that's almost as good.
Thu May 13, 2021 7:26 am

MV Santa
GTS250, 1960 VBA, 1975 VBC, 1980 P200E cutdown
Joined: 04 May 2010
Posts: 4487
Location: Sedgwick, Kansas
 
MV Santa
GTS250, 1960 VBA, 1975 VBC, 1980 P200E cutdown
Joined: 04 May 2010
Posts: 4487
Location: Sedgwick, Kansas
Thu May 13, 2021 7:26 am linkquote
The one on top came from a basic set of tools that my dad gave me for my 17th birthday in 1978 so that I wouldn't be borrowing his tools. I still have most of them. In almost 43 years it has never missed a click.

The middle one is an S&K swivel head. It is good for getting in tight places like spark plugs in modern engines.

The bottom one is a stepless stubby. You reverse it by pushing the square driver to the other side. I have a set of three, 1/4, 3/8 and 1/2 inch drive. Jess posted one similar. Mine are chineseium. I would bet his aren't.



Thu May 13, 2021 7:45 am

Hooked
61 VBB and 79 P200
Joined: 01 Jan 2018
Posts: 167
Location: Folsom CA
 
Hooked
61 VBB and 79 P200
Joined: 01 Jan 2018
Posts: 167
Location: Folsom CA
Thu May 13, 2021 7:45 am linkquote
greasy125 wrote:
The new stuff is junk, comparatively to the old. So either you jump up to high line or hope for the best. If you’re not using it day to day you’ll be alright.
Gotta agree with you there. I still use the Craftsman set my stepdad bought me over 40 years ago when he put me to work in his BMW shop. I was always jealous though of his Snap-On stuff.
Thu May 13, 2021 1:05 pm

Petty Tyrant
GTS250 GTS300 MP3 500
Joined: 11 Oct 2005
Posts: 30939
Location: Bay Area, California
 
Petty Tyrant
GTS250 GTS300 MP3 500
Joined: 11 Oct 2005
Posts: 30939
Location: Bay Area, California
Thu May 13, 2021 1:05 pm linkquote
vintage red matthew wrote:
Jess posted one similar. Mine are chineseium. I would bet his aren't.
I can't remember, actually. I don't think that one is especially nice, so might very well be import.

I didn't post a picture of my Wera ratchets, however. And actually, those are easily my favorites.
Thu May 13, 2021 10:33 pm

Molto Verboso
bare metal cafe racer
Joined: 01 Sep 2017
Posts: 1103
Location: Aotearoa (New Zealand)
 
Molto Verboso
bare metal cafe racer
Joined: 01 Sep 2017
Posts: 1103
Location: Aotearoa (New Zealand)
Thu May 13, 2021 10:33 pm linkquote
jess wrote:
I can't remember, actually. I don't think that one is especially nice, so might very well be import.

I didn't post a picture of my Wera ratchets, however. And actually, those are easily my favorites.
Third one along looks like a Wera. Love my set.
Fri May 14, 2021 5:42 am

Petty Tyrant
GTS250 GTS300 MP3 500
Joined: 11 Oct 2005
Posts: 30939
Location: Bay Area, California
 
Petty Tyrant
GTS250 GTS300 MP3 500
Joined: 11 Oct 2005
Posts: 30939
Location: Bay Area, California
Fri May 14, 2021 5:42 am linkquote
pheasant plucker wrote:
Third one along looks like a Wera. Love my set.
It is, but it's a hex bit driver.
Thu May 27, 2021 11:49 am

Hooked
'81 50 special,'57 GS150 VS3,'59 152L2,'60 SII Li150
Joined: 18 Mar 2009
Posts: 189
Location: The garden of England
 
Hooked
'81 50 special,'57 GS150 VS3,'59 152L2,'60 SII Li150
Joined: 18 Mar 2009
Posts: 189
Location: The garden of England
Thu May 27, 2021 11:49 am linkquote
Bought this tiny little fella for working on bicycles, but comes in very handy indeed. Short quarter incher stops my big fat pork sausage fingers from over tightening things! I know you shouldn't tighten fasteners up with a ratchet, but it's easy to get caught up in the moment.



Thu May 27, 2021 2:33 pm

Enthusiast
Joined: 02 Oct 2019
Posts: 50
Location: RI
 
Enthusiast
Joined: 02 Oct 2019
Posts: 50
Location: RI
Thu May 27, 2021 2:33 pm linkquote
My favorite ratchet is the one that I have with me. This little kit lives in the cowl. I need to cut up some foam to make an insert that keeps this crap from thumping/rattling around.



Thu May 27, 2021 4:44 pm

Member
PX80
Joined: 16 May 2021
Posts: 15
Location: Montreal, Qc, CAN
 
Member
PX80
Joined: 16 May 2021
Posts: 15
Location: Montreal, Qc, CAN
Thu May 27, 2021 4:44 pm linkquote
My favourite tool/ratchet/wrench is the one I can find when I look for it. My tool tray is not very well organized, to say the least
Thu May 27, 2021 5:22 pm

Sergeant at Arms
Weird 80's Vespas & Cool Vintage Lambrettas
Joined: 21 Oct 2005
Posts: 8909
Location: The state of insanity, SoCal
 
Sergeant at Arms
Weird 80's Vespas & Cool Vintage Lambrettas
Joined: 21 Oct 2005
Posts: 8909
Location: The state of insanity, SoCal
Thu May 27, 2021 5:22 pm linkquote
Snap-on TF72

1/4” flex head. I guarantee that it’ll melt your face with a whole: WHY DIDN’T I GET THIS SOONER vibe, you’ll likely never have to rebuild it, and if you do there are rebuild kits available.

Coupled with an wobble extension and a u-joint there’s almost nothing this little beast can’t do.

It has super fine action, low profile, and rated to 75 lb/ft so it punches about its weight class.

Is it expensive, yes. Will you ever have to buy another, no. Will you revel in the delight of reaching difficult fasteners easily, absolutely.

Trust me on this one.
Thu May 27, 2021 5:40 pm

Ossessionato
79 P200E, 62 Allstate, 2008 Stella
Joined: 11 Jan 2006
Posts: 2165
Location: Florence, OR
 
Ossessionato
79 P200E, 62 Allstate, 2008 Stella
Joined: 11 Jan 2006
Posts: 2165
Location: Florence, OR
Thu May 27, 2021 5:40 pm linkquote
greasy125 wrote:
Snap-on TF72
Note to self - look this tool up!

So check this out. My mom owned this - it's a ratcheting screwdriver. She used it making class A Pace Arrow motorhomes back in the day.

It makes quick work in taking off the air box cover and air filter!


Ratchet closed - notice the lever that will make it ratchet to the left, right, or lock in the middle.


Ratchet open.

Thu May 27, 2021 6:44 pm

Hooked
1972 Vespa GTR, 1963 Lambretta LI 125
Joined: 05 Nov 2018
Posts: 173
Location: Halifax, England
 
Hooked
1972 Vespa GTR, 1963 Lambretta LI 125
Joined: 05 Nov 2018
Posts: 173
Location: Halifax, England
Thu May 27, 2021 6:44 pm linkquote
We call those Yankee screwdrivers over here in the UK. They were mostly used by joiners back in the day before electric drill drivers.
Thu May 27, 2021 7:04 pm

Addicted
2006 GT200L "Lone Star"-Sold, 2006 Yamaha Majesty YP400(Sold)
Joined: 15 Jan 2019
Posts: 667
Location: Texas
 
Addicted
2006 GT200L "Lone Star"-Sold, 2006 Yamaha Majesty YP400(Sold)
Joined: 15 Jan 2019
Posts: 667
Location: Texas
Thu May 27, 2021 7:04 pm linkquote
Favorites
Here are the ratchets I use for nearly every mechanical project. The Craftsman 1/4 and 3/8 inchers are probably 40 years old. The Craftsman torque wrench replaced an old deflecting beam style (that I still have) in daily use. The flex head has been useful with Vespa spark plugs. The orange screwdriver ball came with a cheap giveaway tool set but I use it all the time.



Fri May 28, 2021 3:55 am

Enthusiast
Joined: 02 Oct 2019
Posts: 50
Location: RI
 
Enthusiast
Joined: 02 Oct 2019
Posts: 50
Location: RI
Fri May 28, 2021 3:55 am linkquote
L4NFF wrote:
We call those Yankee screwdrivers over here in the UK. They were mostly used by joiners back in the day before electric drill drivers.
We call them yankee screwdrivers on this side of the pond, too. At least my family does.
Fri May 28, 2021 4:11 am

Molto Verboso
2007 Stella 225
Joined: 02 Nov 2019
Posts: 1744
Location: Rochester, Minnesota
 
Molto Verboso
2007 Stella 225
Joined: 02 Nov 2019
Posts: 1744
Location: Rochester, Minnesota
Fri May 28, 2021 4:11 am linkquote
greasy125 wrote:
Snap-on TF72

1/4” flex head. I guarantee that it’ll melt your face with a whole: WHY DIDN’T I GET THIS SOONER vibe, you’ll likely never have to rebuild it, and if you do there are rebuild kits available.

Coupled with an wobble extension and a u-joint there’s almost nothing this little beast can’t do.

It has super fine action, low profile, and rated to 75 lb/ft so it punches about its weight class.

Is it expensive, yes. Will you ever have to buy another, no. Will you revel in the delight of reaching difficult fasteners easily, absolutely.

Trust me on this one.
I have and use that same style of ratchet made by Duralast, they are great. Duralast upped the anti a bit with 100 teeth. I was using it last night while adjusting, the drive belt on my motorcycle. Only room for about 3/16 of a turn, at a time.







Tue Jun 08, 2021 5:59 pm

Sergeant at Arms
Weird 80's Vespas & Cool Vintage Lambrettas
Joined: 21 Oct 2005
Posts: 8909
Location: The state of insanity, SoCal
 
Sergeant at Arms
Weird 80's Vespas & Cool Vintage Lambrettas
Joined: 21 Oct 2005
Posts: 8909
Location: The state of insanity, SoCal
Tue Jun 08, 2021 5:59 pm linkquote
now that i'm back from the brink of madness...



so this here is what i call the triple threat.

aforementioned 1/4" snappy flex, the extension is a wobble/fixed and the u-joint into what ever you need.

pro tip: the u-joint has electrical tape so it doesn't flop all over the place.
Tue Jun 08, 2021 6:32 pm

Enthusiast
‘58 VBA ‘79CT90
Joined: 25 Dec 2019
Posts: 57
Location: Chico CA
 
Enthusiast
‘58 VBA ‘79CT90
Joined: 25 Dec 2019
Posts: 57
Location: Chico CA
Tue Jun 08, 2021 6:32 pm linkquote
^ Legit
  DoubleGood Vespa T-Shirts  

All Content Copyright 2005-2021 by Modern Vespa. All Rights Reserved.

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

Shop on Amazon Smile with Modern Vespa
[ Time: 0.0566s ][ Queries: 24 (0.0339s) ][ Debug on ][ 156 ][ Thing Two ]