Im contemplating fitting the BGM 177 kit to one of my PX scoots…
I know that this topic has been discussed many times before. I used the search but any feedback has been a while back so just wanted to ask a few questions:
1) The BGM /Scooter Center installation recommendations are written clearly, which is great….
On the carb side they recommend as a starting point:
125 - 130 MJ
Non drilled standard filter.
Not mentioned is either a Fast-Flow fuel tap or drilled fuel bowl inlet?
Has anyone set-up there BGM Kit as above or Is more fuel needed with the Fast-Flow fuel tap and drilled carb?
I will fit a new Polini box exhaust so nothing over the top…
2) Gearing wise I have a 22/68 clutch. Too short or is a 23/68 a necessity?
Im pretty light so no real weight on the scoot.
3) Overall feedback as a BGM 177 kit owner.
Are you happy with the BGM?
It would be replacing the basic Pinasco 177 Alu kit thats to say the least underwhelming..