Fri Oct 19, 2018 9:23 am

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Fri Oct 19, 2018 9:23 am linkquote
A new 177 contender has been announced from VMC, going on sale in mid November. It's a cast iron copy of their aluminum cylinder (Stelvio) with a CNC head and a 2 rings piston. It's price, ONLY 129EUR!!!

The aluminum one is already a great kit and it's been making a name in Italy for it's price, performance and overall quality. A friend of mine, has been riding everyday with a Stelvio kit on his PX150 for the past 6 months and after 4830Kms his is very pleased with the kit. Apart from a little piston rattle (had it from the start) the kit is bulletproof so far...

Following, a video (don't use Chrome cause it won't play) from a dyno run with the Stelvio, installed as P&P without porting. Standard re-jetted SI24/24 and a Polini Original BOX exhaust pushing 17HPs. Not Bad...

For me, the cast iron kit is a sure purchase for my non-indicators P150X...

A new piston and a re-bore on a stock cylinder will cost more than this kit...

Specs
Diameter: 63mm
Stroke: 57mm
Displacement: 177.59cc
Port timings: 110°/170°
Suggested squish: 1.2mm ±0.1mm
Timing: 19°
Jetting: 125-130



Last edited by SaFiS on Fri Nov 09, 2018 10:37 am; edited 1 time in total
Fri Oct 19, 2018 9:40 am

bodgemaster
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: 26 Sep 2013
Posts: 6502
Location: So Cal
 
bodgemaster
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: 26 Sep 2013
Posts: 6502
Location: So Cal
Fri Oct 19, 2018 9:40 am linkquote
129EUR? Where?
Fri Oct 19, 2018 9:44 am

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Fri Oct 19, 2018 9:44 am linkquote
SoCalGuy wrote:
129EUR? Where?
Italy. I will send them an email for shipping costs. They charge 11EUR for Italy but for Greece we have to ask...

From their direct reseller (kit not listed yet)...
https://www.avotecnica.com/

And their FB announcement...
https://www.facebook.com/377243309404809/photos/a.387390548390085/524588498003622/
Fri Oct 19, 2018 12:27 pm

bodgemaster
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: 26 Sep 2013
Posts: 6502
Location: So Cal
 
bodgemaster
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: 26 Sep 2013
Posts: 6502
Location: So Cal
Fri Oct 19, 2018 12:27 pm linkquote
My Italian isn't very good, but it looks like 129EUR only gets you the cylinder and piston. The whole kit, including the head, is 249EUR. Still a decent price.

https://www.avotecnica.com//index.php?main_page=product_info&cPath=155_156&products_id=1678&zenid=6at3teg0kf1beukosru0f3hjl4
Fri Oct 19, 2018 12:30 pm

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Fri Oct 19, 2018 12:30 pm linkquote
The cast iron kit will be sold at 129EUR. It's not listed on the site yet. It will be available in mid November. The aluminum kit sells at 249EUR as you already mentioned...
Fri Oct 19, 2018 3:28 pm

Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
 
Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
Fri Oct 19, 2018 3:28 pm linkquote
Thanks for the heads-up, I'll bet the introductory offer won't last long. I like iron and this is a nice piece of kit and a hell of a deal. 8 bolt head and I am liking that exhaust manifold!

Mike, I figured out how to translate the announcement and hot damn, it confirms Safis' good news!



Mon Oct 22, 2018 9:36 am

Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
 
Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
Mon Oct 22, 2018 9:36 am linkquote
Does anyone happen to know if either of the VMC kits can be fitted with the e-starter gear still on the flywheel? I have a brand new, but never used 2014 PX125, and I'd like a bolt on kit which requires no modifications other than an upjet and a Polini box pipe. Elestart is a must, but I don't want another DR177.
Mon Oct 22, 2018 5:47 pm

Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
 
Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
Mon Oct 22, 2018 5:47 pm linkquote
I've asked a FB friend who's fitted one, will let you know when he gets back to me.
Tue Oct 23, 2018 12:05 am

Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
 
Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
Tue Oct 23, 2018 12:05 am linkquote
Cheers Michael. This PX is a keeper, and I want it to be as close to factory as possible, but it would be irresponsible of me to leave the 125 top end and cat exhaust in place!!
Tue Oct 23, 2018 1:38 am

Jet Eye Master
PX221 MHR, O tuned PX200, PX180 Quattrini and some motorbikes
Joined: 14 Jun 2017
Posts: 3357
Location: London UK
 
Jet Eye Master
PX221 MHR, O tuned PX200, PX180 Quattrini and some motorbikes
Joined: 14 Jun 2017
Posts: 3357
Location: London UK
Tue Oct 23, 2018 1:38 am linkquote
Haven't heard many stories from this kit yet but looks really good. Nice short thin ring piston. Large transfers from the base. Removable stub.
Iron barrel is so easy to modify. What's not to like. Could easily be made to do anything you want.
Tue Oct 23, 2018 2:22 am

Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
 
Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
Tue Oct 23, 2018 2:22 am linkquote
If Jack likes it, now I really want it!
Maybe time to get in line... Anybody got any idea if they'd ship to USA?
Tue Oct 23, 2018 3:30 am

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Tue Oct 23, 2018 3:30 am linkquote
Picture from a friend's Stelvio kit in Italy. He has put almost 10k Kms on it. Notice the excessive "burn leak" below the ring. He also had the "rattle" from the beginning, so it's probably a tolerance fault on the first kits. He told as that the newer kits have a better fit. His kit was never properly broken in and WOTed all the time. They tried his piston on the cast iron kit and they managed to soft seize it three times so far (WOTed it immediately) but after that it worked fine. It gets the OK from me

Terry, I can get one for you and ship it your way. I will definitely buy one for me...



Tue Oct 23, 2018 9:58 am

Molto Verboso
Wrecked '61 VNB '65 Allstate
Joined: 08 May 2012
Posts: 1519
Location: PNW
 
Molto Verboso
Wrecked '61 VNB '65 Allstate
Joined: 08 May 2012
Posts: 1519
Location: PNW
Tue Oct 23, 2018 9:58 am linkquote
Out of the box, any theories on how it would hold up next to a malossi 166?
Tue Oct 23, 2018 2:27 pm

Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
 
Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
Tue Oct 23, 2018 2:27 pm linkquote
SaFiS wrote:
...
Terry, I can get one for you and ship it your way. I will definitely buy one for me...
Thanks! @ 129EUR I just can't say no. Can you have mine shipped to Peiraias?
Tue Oct 23, 2018 3:34 pm

Molto Verboso
Wrecked '61 VNB '65 Allstate
Joined: 08 May 2012
Posts: 1519
Location: PNW
 
Molto Verboso
Wrecked '61 VNB '65 Allstate
Joined: 08 May 2012
Posts: 1519
Location: PNW
Tue Oct 23, 2018 3:34 pm linkquote
What about statestide shipping? Can i jump on the wagon?
Thu Oct 25, 2018 10:31 am

Hooked
Joined: 14 Jun 2016
Posts: 110
Location: Macedonia
 
Hooked
Joined: 14 Jun 2016
Posts: 110
Location: Macedonia
Thu Oct 25, 2018 10:31 am linkquote
I am so getting this. Thanks for the info Safis
Fri Oct 26, 2018 5:09 am

Hooked
Bodgerific 150 Super, PX200(ish...), US 50 Special in progress
Joined: 18 Aug 2016
Posts: 476
Location: Melbourne, Way Downunder
 
Hooked
Bodgerific 150 Super, PX200(ish...), US 50 Special in progress
Joined: 18 Aug 2016
Posts: 476
Location: Melbourne, Way Downunder
Fri Oct 26, 2018 5:09 am linkquote
OK. How do I get one shipped to Australia?
Fri Oct 26, 2018 5:49 am

Member
2016 sprint 150 / 2005 PX 150 / 2012 HD FXE
Joined: 22 Oct 2017
Posts: 13
Location: Jonesboro Arkansas
 
Member
2016 sprint 150 / 2005 PX 150 / 2012 HD FXE
Joined: 22 Oct 2017
Posts: 13
Location: Jonesboro Arkansas
Fri Oct 26, 2018 5:49 am linkquote
Will there be any U.S. sales ? My italian is crap and am translating web site.
Fri Oct 26, 2018 8:15 am

Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
 
Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
Fri Oct 26, 2018 8:15 am linkquote
Oh, hey! There's now a video on the FB page. Thing has some serious ports alright ...

https://www.facebook.com/377243309404809/videos/467593163648425/
Fri Oct 26, 2018 7:11 pm

Hooked
1966 Sprint 150 & px200 and a shed full o shit
Joined: 15 Aug 2016
Posts: 149
Location: New Zealand
 
Hooked
1966 Sprint 150 & px200 and a shed full o shit
Joined: 15 Aug 2016
Posts: 149
Location: New Zealand
Fri Oct 26, 2018 7:11 pm linkquote
Postage
FYI....

Prompt in replying to my email.

Available 15th Nov 2018.

70 Euro to post to NZ ($120ish $NZD). Same price regardless Ali or Cast iron.

I've replied and asked if it will work with Elestart or if a fin needs chopping off. Will let yous know what they say.

Maybe postage will be same if getting some other little bits and pieces at same time to make it bit more worthwhile? That shop in Cologne is good for a flat rate in this way (27 Euro it seems to be every time).

Cheerio

PC
Fri Oct 26, 2018 10:35 pm

Molto Verboso
Wrecked '61 VNB '65 Allstate
Joined: 08 May 2012
Posts: 1519
Location: PNW
 
Molto Verboso
Wrecked '61 VNB '65 Allstate
Joined: 08 May 2012
Posts: 1519
Location: PNW
Fri Oct 26, 2018 10:35 pm linkquote
kb6emh wrote:
Will there be any U.S. sales ? My italian is crap and am translating web site.
Yeah. What's up with Shipping to the USA? I want one of these.
Sat Oct 27, 2018 3:08 am

Hooked
1966 Sprint 150 & px200 and a shed full o shit
Joined: 15 Aug 2016
Posts: 149
Location: New Zealand
 
Hooked
1966 Sprint 150 & px200 and a shed full o shit
Joined: 15 Aug 2016
Posts: 149
Location: New Zealand
Sat Oct 27, 2018 3:08 am linkquote
Elestart
So I asked if it works with Elestart and received this reply:

It also mounts with the electric starter rack, at the limit it gives a polish to the cylinder. For the engine casing only the central hole for the candle should be made

Hope this info helps,

PC
Sat Oct 27, 2018 8:32 am

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Sat Oct 27, 2018 8:32 am linkquote
@Terry: How long will you be here?? We are preparing a team order. The kit will be out on the 15th of November but maybe we will manage to get them a bit sooner...
Fri Nov 09, 2018 10:34 am

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Fri Nov 09, 2018 4:43 pm

Hooked
Joined: 14 Jun 2016
Posts: 110
Location: Macedonia
 
Hooked
Joined: 14 Jun 2016
Posts: 110
Location: Macedonia
Fri Nov 09, 2018 4:43 pm linkquote
Safis, could you share how much is delivery to Greece?

I might go to thessaloniki next week and I hope my friend is not traveling anywhere so I can order on his address.
Sat Nov 10, 2018 4:20 am

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Sat Nov 10, 2018 4:20 am linkquote
jocco wrote:
Safis, could you share how much is delivery to Greece?

I might go to thessaloniki next week and I hope my friend is not traveling anywhere so I can order on his address.
Because we've made a team order for a whole box (10 kits), shipping costs were low. A friend will receive the box in Ioannina and then he'll send us the kits by bus to keep it on the cheap side (final cost per kit, including the bus fare, stands at 13EUR)...

You'll have to contact them to get a quote for individual orders...

Last edited by SaFiS on Sat Nov 10, 2018 4:23 am; edited 1 time in total
Sat Nov 10, 2018 4:22 am

Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
 
Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
Sat Nov 10, 2018 4:22 am linkquote
SaFiS wrote:
... we've made a team order for a whole box (10 kits)...
That's a lot of faith!!
Sat Nov 10, 2018 4:27 am

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Sat Nov 10, 2018 4:27 am linkquote
Ginch wrote:
That's a lot of faith!!
I agree, but the price gave no room for hesitation...
Sat Nov 10, 2018 4:30 am

Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
 
Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
Sat Nov 10, 2018 4:30 am linkquote
SaFiS wrote:
Ginch wrote:
That's a lot of faith!!
I agree, but the price gave no room for hesitation...
True! Around here it would be easier herding cats than finding ten people who would agree to buy the same kit at the same time! Must be a good community you have there.
Sat Nov 10, 2018 5:56 am

Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
 
Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
Sat Nov 10, 2018 5:56 am linkquote
Ordered one for the PX125 which I might use next summer. Cost of shipping to UK = Euro 15. Total cost = Euro 144. It will be interesting to see how well this runs with an upjetted 20/20 carb! I will probably use a Polini box as they look closest to a pre-Cat stock PX pipe.
Sat Nov 10, 2018 10:29 am

Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
 
Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
Sat Nov 10, 2018 10:29 am linkquote
yeah, but
Ginch wrote:
SaFiS wrote:
Ginch wrote:
That's a lot of faith!!
I agree, but the price gave no room for hesitation...
True! Around here it would be easier herding cats than finding ten people who would agree to buy the same kit at the same time! Must be a good community you have there.
He only had to find 8 others around there besides himself when I jumped in. At that price and with such a devoted bunch of Vespa shifty fans there, I don't think he broke much of a sweat finding more guinea pigs.

We shall see and this is only my 2nd real kit(don't count DR70's on old 50 smallies) so I am pretty stoked. I just might stick it on the 3 ported Bajaj motor in my AllState. With 10" gearing and 8" wheel, just adding a tooth on the primary isn't enough, still wants a higher gear after winding it out in 4th. But assuming this will rev higher, it will still be geared too low but will have higher top speed(50ish now) and be a ton of fun getting there.

Big thanks to Chris for putting out the word and arranging this group order so frugally. Even looks like he knows somebody to bring it down to Athens for me, that's going the extra mile kilometer
Tue Nov 20, 2018 11:37 am

Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
 
Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
Tue Nov 20, 2018 11:37 am linkquote
My kit arrived yesterday. It looks really good but I've not checked the ports or the piston to bore clearance yet. The welding around the exhaust flange looks a little rough, but I'm sure a bit of filing and finishing will sort it out. The fit of the head into the cylinder recess is very nice.

I would have preferred the traditional angled position for the spark plug, as the centre plug means cutting a hole in the cowling. This detracts from the Piaggio stock look, and I know from past experience that the stock HT lead on a 2011+ PX will not reach the centred plug. Not a problem with the old Ducati CDI, but the new ones have the HT lead moulded in, so you cannot just replace the lead with a longer one.
⬆️    About 1 month elapsed between posts    ⬇️
Thu Dec 20, 2018 3:09 pm

Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
 
Ossessionato
1979 P150X, 1983 P200E, 1988 T5, 1995 PX200E, 2011 Yamaha Fazer 600 S2
Joined: 02 Aug 2015
Posts: 3122
Location: Veria, Greece
Thu Dec 20, 2018 3:09 pm linkquote
Just a heads up. VMC has redesigned the piston to eliminate the rattling problem. They changed the skirt, pin position and uniformity of the piston (conicity & ovality).
Good news, our team order is delayed cause we're getting the new pistons... 8) 8) 8)



Fri Dec 21, 2018 2:26 pm

Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
 
Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 '58 AllState '68 Sprint '80 50special and a '66(?) Super125
Joined: 22 Nov 2010
Posts: 8714
Location: seattle/athens
Fri Dec 21, 2018 2:26 pm linkquote
V oodoo wrote:
Ginch wrote:
SaFiS wrote:
Ginch wrote:
That's a lot of faith!!
I agree, but the price gave no room for hesitation...
True! Around here it would be easier herding cats than finding ten people who would agree to buy the same kit at the same time! Must be a good community you have there.
..... I don't think he broke much of a sweat finding more guinea pigs.

Looks like us guinea pigs have dodged at least one bullet .
Better this than this .
And looks like BGM is on their game and doesn't want launch problems with a large group of important customers. Hopefully they'll make the new pistons available for kits already shipped. What's up, swa45?
Fri Dec 21, 2018 9:59 pm

Hooked
PX
Joined: 07 Feb 2016
Posts: 298
Location: Switzerland
 
Hooked
PX
Joined: 07 Feb 2016
Posts: 298
Location: Switzerland
Fri Dec 21, 2018 9:59 pm linkquote
Hi Guys...anyone recieved there kit yet?
Are there any instructions withe the kit like squish recommendations?
I only see paper cylinder gaskets & no metal gaskets?

I ask before I order one...as I would like to know for sure what the squish should be..
Fri Dec 21, 2018 11:34 pm

Addicted
PX 150
Joined: 15 Sep 2006
Posts: 553
Location: Gold Coast, Australia
 
Addicted
PX 150
Joined: 15 Sep 2006
Posts: 553
Location: Gold Coast, Australia
Fri Dec 21, 2018 11:34 pm linkquote
My dad once said to me.
'Carefull son, that's Mutton dressed as lamb'
Sat Dec 22, 2018 1:50 am

Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
 
Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
Sat Dec 22, 2018 1:50 am linkquote
Avotecnica is sending me a new piston. I've not taken the kit out of the box yet, so I cannot comment on the issue that has been reported.
Tue Jan 08, 2019 7:26 am

Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
 
Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
Tue Jan 08, 2019 7:26 am linkquote
My replacement piston arrived today. I cannot spot the difference at first glance, but I can say that I have been extremely impressed with Avotecnica's service.

[Edit] The new piston skirt is 2mm longer than the original one.
Tue Jan 08, 2019 1:44 pm

Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
 
Veni, Vidi, Posti
74 Super, 75 Super, PX project, LML off-roader and new to 2018, '66 Blue Badge Smallframe
Joined: 30 Nov 2011
Posts: 8166
Location: Victoria, Australia
Tue Jan 08, 2019 1:44 pm linkquote
That's impressive service! Some other companies might learn from that!
Tue Jan 08, 2019 10:40 pm

Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
 
Molto Verboso
One or two fun scoots....nothing too precious
Joined: 17 Jul 2013
Posts: 1853
Location: UK (South East)
Tue Jan 08, 2019 10:40 pm linkquote
I've ordered bits and pieces from Italy in the past, and it was like throwing money into a black hole. Will it ever arrive? Will it arrive this year? Will the company respond to emails and phone calls? Like I said, super impressed
  DoubleGood Vespa Design  

All Content Copyright 2005-2022 by Modern Vespa. All Rights Reserved.

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

Shop on Amazon Smile with Modern Vespa

[ Time: 0.0499s ][ Queries: 8 (0.0274s) ][ Debug on ][ 211 ][ Thing One ]