Modern Vespa : gas/oil ratio

gas/oil ratio

OP vespa auntie UTC details Ossessionato Joined: UTC Posts: 3406 Location: pacifica,ca.
OP vespa auntie Ossessionato Joined: UTC Posts: 3406 Location: pacifica,ca.	UTC quote can someone post a picture of how much 2 stroke oil for a gallon of gas using 1 of those plastic pouring cups

SoCalGuy UTC details bodgemaster 63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150 Joined: UTC Posts: 7230 Location: So Cal
SoCalGuy bodgemaster 63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150 Joined: UTC Posts: 7230 Location: So Cal	UTC quote Here you go. Positive

OP vespa auntie UTC details Ossessionato Joined: UTC Posts: 3406 Location: pacifica,ca.
OP vespa auntie Ossessionato Joined: UTC Posts: 3406 Location: pacifica,ca.	UTC quote that much for 1 gallon? thanks btw.

qascooter UTC details Ossessionato 79 P200E (Ruby), 62 Allstate (B-62), 63 VBB (Storm) Joined: UTC Posts: 4711 Location: Florence, OR
qascooter Ossessionato 79 P200E (Ruby), 62 Allstate (B-62), 63 VBB (Storm) Joined: UTC Posts: 4711 Location: Florence, OR	UTC quote Hey Auntie, I did the same thing as SoCalGuy. Mark the cortect line with a sharpie then you don't have to think about where to fill the cup to.

Ray8 UTC details Ossessionato Joined: UTC Posts: 2071 Location: Los Angeles
Ray8 Ossessionato Joined: UTC Posts: 2071 Location: Los Angeles	UTC quote Alternatively, you could buy a set like these. Pre-fill 'em at home with a funnel. One bottle to a gallon of gas. Eyeball-add whatever + gallon fraction you need. https://www.amazon.com/Earths-Essentials-Refillable-Dispenser-Dispensing/dp/B00SNO5U0A/ref=sr_1_3?crid=2N4PVEL0THEFP&keywords=2.5+oz+bottles+with+caps&qid=1671043474&sprefix=2.5+oz+bottle%2Caps%2C445&sr=8-3 Positive

Ray8 UTC details Ossessionato Joined: UTC Posts: 2071 Location: Los Angeles
Ray8 Ossessionato Joined: UTC Posts: 2071 Location: Los Angeles	UTC quote SoCalGuy: Saw your signature My new friend was a "no hands" test driver during the Saigon bodge era.

Moto64 UTC details Ossessionato '64 Motovespa 150S (177) , '65 VBB, '66 Allstate SF, '66 180SS, '58 LD 125 (150) Joined: UTC Posts: 2090 Location: S.Salem, NY
Moto64 Ossessionato '64 Motovespa 150S (177) , '65 VBB, '66 Allstate SF, '66 180SS, '58 LD 125 (150) Joined: UTC Posts: 2090 Location: S.Salem, NY	UTC quote Ray8 wrote: https://www.amazon.com/Earths-Essentials-Refillable-Dispenser-Dispensing/dp/B00SNO5U0A/ref=sr_1_3?crid=2N4PVEL0THEFP&keywords=2.5+oz+bottles+with+caps&qid=1671043474&sprefix=2.5+oz+bottle%2Caps%2C445&sr=8-3 That's my method. Basically ride gallon-to-gallon. No measuring and pouring oil at the pump.

Grumpnut UTC details Addicted '58 VBA Joined: UTC Posts: 510 Location: Chico CA
Grumpnut Addicted '58 VBA Joined: UTC Posts: 510 Location: Chico CA	UTC quote 2.6 oz per gallon.

Christopher_55934 UTC details Ossessionato 2007 Stella 225 Joined: UTC Posts: 3547 Location: Rochester, Minnesota
Christopher_55934 Ossessionato 2007 Stella 225 Joined: UTC Posts: 3547 Location: Rochester, Minnesota	UTC quote Get a bottle similar to this, squeeze what you want into top pour in done. No containers to clean out etc. https://www.usplastic.com/catalog/item.aspx?itemid=22892&catid=1370&clickid=popcorn https://www.containerandpackaging.com/catalog/plastic-containers/plastic-bottles/twin-neck-bottles I use an old sta-bil bottle. https://www.goldeagle.com/product/sta-bil-fuel-stabilizer/

Christopher_55934

UTC

details

Ossessionato

2007 Stella 225

Joined: UTC
Posts: 3547
Location: Rochester, Minnesota

Christopher_55934

Ossessionato

2007 Stella 225

Joined: UTC
Posts: 3547
Location: Rochester, Minnesota

UTC quote

Christopher_55934 wrote:

Get a bottle similar to this, squeeze what you want into top pour in done. No containers to clean out etc.

https://www.usplastic.com/catalog/item.aspx?itemid=22892&catid=1370&clickid=popcorn

https://www.containerandpackaging.com/catalog/plastic-containers/plastic-bottles/twin-neck-bottles

I use an old sta-bil bottle.

https://www.goldeagle.com/product/sta-bil-fuel-stabilizer/

Create a small table with oil amount for 1.0 to 2.0 gallons of fuel, in 1/4 gallon increments, tape to seat pan or laminate and attach to springs.

Positive

FridayMatinee UTC details Ossessionato 1958 Allstate 177VMC, 1962 Allstate, Yamaha Vino 70cc Joined: UTC Posts: 2293 Location: Philadelphia
FridayMatinee Ossessionato 1958 Allstate 177VMC, 1962 Allstate, Yamaha Vino 70cc Joined: UTC Posts: 2293 Location: Philadelphia	UTC quote Christopher_55934 wrote: Create a small table with oil amount for 1.0 to 2.0 gallons of fuel, in 1/4 gallon increments, tape to seat pan or laminate and attach to springs. That's a great tip

Post Reply

Modern Vespa is the premier site for modern Vespa and Piaggio scooters. Vespa GTS300, GTS250, GTV, GT200, LX150, LXS, ET4, ET2, MP3, Fuoco, Elettrica and more.

Shop on Amazon with Modern Vespa

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

[ Time: 0.0473s ][ Queries: 4 (0.0383s) ][ live ][ 329 ][ ThingOne ]