Modern Vespa

https://www.youtube.com/watch?v=maE9lRvU3Vs&t=241s
- ROBOT, said it was simple- Plug&Play-
After removing The ( Left-Leg Shield and Cutting the Access panel out), that is when I noticed I probably have a different guts then a 2022 Vespa GTS 300. I procured my Vespa GTS 300 in October, when they where changing things to 2023 Vespa GTS 300,,I will look for when ROBOT did 2023's Access Panel.

I will be back!!
https://www.youtube.com/watch?v=MP783qUqzB0&t=357s
- Nope that is not it!! - I just do not see the Black and Red USB Connector!!.

Help Please!!

Steven K.

My actual Inside, of my Control panel

I can't really help with the problem (I haven't seen a new Vespa up close) but... was that last photo upside down before you uploaded it?

Sorry, You are correct

I watched Robot's video and after about 2 minutes I said to myself "that is something I will gladly pay someone else to do". Good luck on your journey and hopefully some MVer with more wisdom than I offer you some helpful pointers.

It should be connected to your USB port in your glove box.

Thank You For Your Help - Jes, Harbinger and Der Blechfabrer..
- I hope someone will enlighten me on how to resolve this anomaly.
Thank You again, I was hoping Later not Sooner. That I would go down that "Rabbit Hole", on taking off the Glovebox.

Thanx Again.

Steven K.

looking at your pic of your panel (right way up) looks like a 2022. the cable you want will be down out of sight and you'll have to reach down and find it with your fingers. maybe peak with a mirror first or stick your phone in and take a pic (with flash?). or just rip of the glovebox and you'll see it.

That is frequently my response as well.

SteelBytes:
Thanks for the Advice
Think I will hold off on that, as the last resort.

Thanks All.

Steven K.

Removing the glovebox is quite straightforward. You don't even need to struggle around the steering head. Watch this video:

Yes, it is in German, but it shows how it is done very clearly. Its pretty easy. I removed it on my 2020 to install a Stebel horn and ended up not being able to do it because on my Super Tech the space is taken up by components not on on other models.

apex
Thank You!
I hope it does not come to that..

Steven K.

I went looking for where the connector, for the USB resides behind the Glovebox:
Looks like it resides on the main power connector cable:

Still, rather

Quote:

NOT

, take the glovebox off.
- Will use a Mirror to find it through the Access hole.

Wish me Luck!!

Steven K.
[/b]

I have it connected!!:

- Thank You, for all that helped

Steven K.