Modern Vespa

Modern Vespa Owners!

I've had my 250 stored on the center stand for quite some time and if I remember correctly, I stored it without the tilt lock engaged.

I bought a new battery and swapped it in this morning. Bike starts up without issues, but there is a continuous beep (one single non-ending beep and not the horn) and both the yellow and red tilt lock icons are illuminated.

The tilt lock is not engaged (off the center stand, I can lean left and right).

Has anyone experienced this? What was the fix?

Broken wire to tone ring?

I'm sorry, but I'm not sure what you mean. Do you mind elaborating?

2 cables run down to 2 sensors on the front wheels so the tilt ecu knows when to disengage the lock when you start moving. The 2 sensors may be full of crap or the cables may have gone open circuit. It also drives the speedo so if that is working I may be giving you a bum steer.

Check the video I sent to agent orange.

I appreciate you directing me to that video (here for those that are curious: https://www.youtube.com/watch?v=vGSdFmgTTJs&t=76s), but it does not include my specific situation.

I have both the yellow and red tilt lock lights illuminated and a continuous beep (not the horn).