I'm working on a sprint veloce engine. I'm trying to connect the harness to the stator but it appears the stator I have is missing some wires.
See Pic enclosed.
I have a red black yellow wire. The white wire shown was originally a black and red (mixed colour wire) that needed to be replaced.
However I'm finding that the sip loom has a red black yellow blue and green wire.
The diagrams I have found show that the stator should have a red black green blue and yellow wire.
Am I missing wires off my stator? Do I have the correct stator?
I know very little about these types of ignition.
Any help is appreciated.
Thank you.
N
