Modern Vespa

Hello all,

I'm refurbishing a sprint speedo and I am unable to locate a suitable bulb holder. Case picture is attached. it looks like there are two parts to the holder, I think there is a plastic end available from SIP, but the inner end I cannot locate. I think the holder must have been sole thin metal construction.

any help to locate the right pieces would be much appreciated.

thanks

The inner component of the lighting unit is a spring, which to my knowledge, is not readily available as a standalone part.

thanks for the tip.

any idea where I can see an image of what these looked like?

I may have a go at making one myself.

cheers

Cautiously I tread into the pond, and mention the people's wagon speedometer light fixture will probably seal the deal. They have both spade and screw terminals and have probably been quietly used by the inner circle for years. Or not. It's about ten bucks shipped from everyone

You need the following from SIP and as Jonathan said, there should be a fixed spring inside. Maybe contact Speedo King…

https://www.sip-scootershop.com/en/product/festoon-bulb-holder-speedometer-sip-98485-92787-for-vespa-50ss-90ss-125-pv-et3-125-gt-gt-super-ts-150-vba-vbb-gl-sprint-super-gs-vs5-160-gs-180-ss-rally_14171700

Here's mine. The spring wouldn't come out of the speedo unfortunately.

You can't really see the spring from above in my Primavera speedo. But I can tell its the same as in a VBB speedo. So here are pics. Let me know if you need better pics.

Luigi,

Grazie !

Perfect pictures. I thing with those I can reconstruct something.

thanks again