Good morning, everyone!
I bought a 2008 Piaggio MP3 125 cc and decided to restore it to its factory condition I realize that I have a lot of work ahead of me, but you have to have fun to keep your sanity in this world . The first problem I found was, of course, the suspension lock, which was not working But the situation is very strange ... After turning the key to the 'ON' position, the orange suspension readiness light does not flash There are no audible signals . After turning the key to 'ON' three times and holding down the lock button at the same time, the suspension is locked . Then you can unlock the suspension normally . The seat weight is working. The diagnostic computer occasionally shows a problem with the CAN line. The wiring has been checked and seems to be OK. ECU and suspension controller replaced. The problem persists Has anyone encountered a similar case? Link video :
https://youtube.com/shorts/uun-u9Hkbig?feature=share