Modern Vespa

i made a bracket to mount a stebel nautilus with the existing mounting nut. but i need to move the voltage regulator.

can i put it anywhere? does the ground need to be attached to it?

any other advice would be much appreciated as i am going at this using only my findings on this forum

cheers!!!

Moved to General Discussion, as this is a query, not a report.

I'm not familiar with the ET4, but generally speaking, you ought to be able to put it anywhere. But it will have to have a good solid ground.

RADness

thank you sire!!

all done... came out nice. didnt even have to move the voltage regulator or the CDI module AND i mounted the horn relay on the back of the headlamp relay. the horn itself i tied down to the center of the bike with a vacuum connector i bought from the hardware store.

i have to say, for someone with ZERO experience working on bikes and ZERO knowledge of electronics, i was able to do this without a hitch with the help of this forum.

next on the list are some spotlights (see my post to answer my lighting questions if you want) and a permanent plug for my battery tender.

Here is what I did.

Stebel Nautilus airhorn on an ET4 - simple clean easy (Post 490026)

Thanks for the help!

I am DEF going to need more.

Well done