OP
UTC

Lurker
Vespa S 150
Joined: UTC
Posts: 3
Location: Philadelphia
 
Lurker
Vespa S 150
Joined: UTC
Posts: 3
Location: Philadelphia
UTC quote
Trying to hard wire install a Zumo 660 to my 2011 S 150. I get the electronics but can't figure out the best way to get the wires threaded into the head unit. The cables for the GPS are attached so some bulky hardware and I don't want to start cutting them up. Any ideas or links with instructions for this project? I've seen pictures where the wire goes through the mirror's rubber cover. This would be ideal but I'm just looking for a clean look. The unit itself will be RAM mounted to the mirror stem.
@dougl avatar
UTC

El Macho
0/0
Joined: UTC
Posts: 9052
Location: Porto 4050-570
 
El Macho
@dougl avatar
0/0
Joined: UTC
Posts: 9052
Location: Porto 4050-570
UTC quote
Moved to general discussion.
@dougl avatar
UTC

El Macho
0/0
Joined: UTC
Posts: 9052
Location: Porto 4050-570
 
El Macho
@dougl avatar
0/0
Joined: UTC
Posts: 9052
Location: Porto 4050-570
UTC quote
I would remove the front of the headset and connect the wiring to one of the running lights. Zumos use very little current. Plenty of info in the Wiki.
DoubleGood Design banner

Modern Vespa is the premier site for modern Vespa and Piaggio scooters. Vespa GTS300, GTS250, GTV, GT200, LX150, LXS, ET4, ET2, MP3, Fuoco, Elettrica and more.

Buy Me A Coffee
 

Shop on Amazon with Modern Vespa

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com


All Content Copyright 2005-2025 by Modern Vespa.
All Rights Reserved.


[ Time: 0.0082s ][ Queries: 3 (0.0021s) ][ live ][ 323 ][ ThingOne ]