@pheasant_plucker avatar
UTC

Molto Verboso
bare metal cafe racer
Joined: UTC
Posts: 1379
Location: Aotearoa (New Zealand)
 
Molto Verboso
@pheasant_plucker avatar
bare metal cafe racer
Joined: UTC
Posts: 1379
Location: Aotearoa (New Zealand)
UTC quote
Brother E is freaking out that people are wanting to send him stuff. He is too nice for his own good! Feels he will owe everyone and want to try and pay everyone back. He contacted me to help...

Unfortunately for him I think he should be sponsored. I sent him the K58 rear tire because his rear wheel mod was too good not to be ridden (and deserved the best rubber). And hoped others might see it is possible to get stuff to Indo for Brother E. I actually managed to put his address into a SIP order... The Indo customs stuff took a little bit of work - but I declared it as a birthday present (which it was) and no drama.

So... anyone who wants to gift Brother E some stuff and needs deets on how to do it - hit me up.

And...

SIP!!! SPONSOR BROTHER E!!!

- Sorry Brother E... I'm the wrong person to protect you ;P
⬆️    About 1 month elapsed    ⬇️
@roliver1972 avatar
UTC

Hooked
Joined: UTC
Posts: 169
Location: Bakersfield
 
Hooked
@roliver1972 avatar
Joined: UTC
Posts: 169
Location: Bakersfield
UTC quote
Small frame parts - ? et3
came across an Et3

in search of
gear selector
clutch
flywheel
kickstart lever
handlebar gear shifter tube
stator
exhaust
top end ( will buy a kit and additional things for this as time and money permits)
speedo
shocks - even if they are shot, it will allow me to move the bike around the shop as I am working on things
UTC

Hooked
1952 Allstate 1955 Allstate 1958 lambretta 1965 Allstate 1968 sprint
Joined: UTC
Posts: 495
Location: Central california
 
Hooked
1952 Allstate 1955 Allstate 1958 lambretta 1965 Allstate 1968 sprint
Joined: UTC
Posts: 495
Location: Central california
UTC quote
helping hand
I know this was not on your list, but how are you doing for tires. I have good tires and tubes. I dont live too far from you. scott
@geeklion avatar
UTC

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
 
The Dude
@geeklion avatar
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
UTC quote
Re: Small frame parts - ? et3
Roliver1972 wrote:
came across an Et3

in search of
gear selector
clutch
flywheel
kickstart lever
handlebar gear shifter tube
stator
exhaust
top end ( will buy a kit and additional things for this as time and money permits)
speedo
shocks - even if they are shot, it will allow me to move the bike around the shop as I am working on things
I got you on -
clutch, shocks F&R, speedo-aftermarket but new and fits AND WORKS - will send you pic. Possibly on the kickstart lever-need to look in another box. I should also have a wiring junction box for you too. You should be good on the gear selector parts. On the smallie its internal, with only the 'batwing' being external. All the parts are there, so no separate-external gear selector box.
@gravelrash2004 avatar
UTC

Addicted
P Series / Li / LML / Motobi
Joined: UTC
Posts: 511
Location: UK - 3rd Rock From the Sun
 
Addicted
@gravelrash2004 avatar
P Series / Li / LML / Motobi
Joined: UTC
Posts: 511
Location: UK - 3rd Rock From the Sun
UTC quote
Autissa P200 Barrell, Piston and Head
I recently came across an Autissa aluminium/steel linered P200 barrel. I have no use for it and wondered if anyone on here would or could make use of it?

Come collect it if you are close or arrange your own courier - yes i will post to anyone around the world.

caveats are you are a regular poster/member of this forum rather than a lurker


did i mention its free??
@v_oodoo avatar
UTC

Style Maven
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 - & - '58 AllState '68 Sprint '66(?) Super125 and '72 DanMotor Super150
Joined: UTC
Posts: 9492
Location: seattle/athens
 
Style Maven
@v_oodoo avatar
'74 50s x3 '78 P200 E '84 Cosa '91 PK50XL2 - & - '58 AllState '68 Sprint '66(?) Super125 and '72 DanMotor Super150
Joined: UTC
Posts: 9492
Location: seattle/athens
UTC quote
Dibs on that P200 top end if still available, I have most of a motor w/ no top end. Where is your rock?
@gravelrash2004 avatar
UTC

Addicted
P Series / Li / LML / Motobi
Joined: UTC
Posts: 511
Location: UK - 3rd Rock From the Sun
 
Addicted
@gravelrash2004 avatar
P Series / Li / LML / Motobi
Joined: UTC
Posts: 511
Location: UK - 3rd Rock From the Sun
UTC quote
V oodoo wrote:
Dibs on that P200 top end if still available, I have most of a motor w/ no top end. Where is your rock?
If anyone wants this top end, V oodoo has decided to let someone else have a shout at it and its still for grabsies

would i guess suit someone in Europe or UK as postage to your area from UK could be prohibitive
@birdsnest avatar
UTC

Not So Moderator
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
 
Not So Moderator
@birdsnest avatar
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
UTC quote
I have some smallie stuff that needs a home. Free ... Just pay shipping. Hit me up:
PK flywheel Primavera flywheel
Front mudgaurd
floor rails (Partial... missing one or two)
Tuna can tail light (Deep navy blue paint)
⚠️ Last edited by Birdsnest on UTC; edited 1 time
@sdjohn avatar
UTC

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
 
Veni, Vidi, Posti
@sdjohn avatar
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
UTC quote
Birdsnest I'm interested in the PK flywheel, will send PM
@socalguy avatar
UTC

bodgemaster
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: UTC
Posts: 7046
Location: So Cal
 
bodgemaster
@socalguy avatar
63 GL, 76 Super (x2), 74 Primavera (x2), 79 P200, 06 Fly 150
Joined: UTC
Posts: 7046
Location: So Cal
UTC quote
Tuna can light? Heck yes. pm sent.
@geeklion avatar
UTC

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
 
The Dude
@geeklion avatar
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
UTC quote
Birdsnest, I'll take the smallie front fender. PM Sent! thx.
@birdsnest avatar
UTC

Not So Moderator
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
 
Not So Moderator
@birdsnest avatar
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
UTC quote
Bunch of fookin' vultures.

All the smallie bits bits are spoken for.
@jocco avatar
UTC

Hooked
Joined: UTC
Posts: 110
Location: Macedonia
 
Hooked
@jocco avatar
Joined: UTC
Posts: 110
Location: Macedonia
UTC quote
Damn, is it too late to ask for the smallie floor rails?
@birdsnest avatar
UTC

Not So Moderator
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
 
Not So Moderator
@birdsnest avatar
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
UTC quote
Please note... The flywheel is a primavera flywheel not a PK (Sorry old box was mislabeled.)
@birdsnest avatar
UTC

Not So Moderator
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
 
Not So Moderator
@birdsnest avatar
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
UTC quote
jocco wrote:
Damn, is it too late to ask for the smallie floor rails?
The set is missing a few. Looks like 2 have been used, but they are still available, PM me your address if interested.
@mcweber12 avatar
UTC

Hooked
1980 P200, 1974 90/100 smallframe, 1972 primavera (under construction), 1974 kawasaki F7
Joined: UTC
Posts: 259
Location: San Diego
 
Hooked
@mcweber12 avatar
1980 P200, 1974 90/100 smallframe, 1972 primavera (under construction), 1974 kawasaki F7
Joined: UTC
Posts: 259
Location: San Diego
UTC quote
Messaged about the flywheel. Laughing emoticon
@jocco avatar
UTC

Hooked
Joined: UTC
Posts: 110
Location: Macedonia
 
Hooked
@jocco avatar
Joined: UTC
Posts: 110
Location: Macedonia
UTC quote
I just wanna thank Tierney for sending me the smallframe 16/16 cab for free.

I owe you at least a few beers for the trouble.
Forum member supplied image with no explanatory text
UTC

Veni, Vidi, Posti
Joined: UTC
Posts: 6406
Location: Tega Cay, SC
 
Veni, Vidi, Posti
Joined: UTC
Posts: 6406
Location: Tega Cay, SC
UTC quote
glad to help out
⬆️    About 1 year elapsed    ⬇️
UTC

Molto Verboso
1958 Allstate 177VMC, 1962 Allstate, Yamaha Vino 70cc
Joined: UTC
Posts: 1777
Location: Philadelphia
 
Molto Verboso
1958 Allstate 177VMC, 1962 Allstate, Yamaha Vino 70cc
Joined: UTC
Posts: 1777
Location: Philadelphia
UTC quote
I'm looking for a license plate holder for my Allstate. Anyone have one laying around?
@qascooter avatar
UTC

Ossessionato
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
 
Ossessionato
@qascooter avatar
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
UTC quote
TAKEN - P200 exhaust
These are going to the TDC scooter club in Eugene

I've got a stock P200 exhaust off a 1979 in good condition.
Just pay for postage.
Shoot me a PM with your address and I'll see what it's going to cost.
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
⚠️ Last edited by qascooter on UTC; edited 1 time
@qascooter avatar
UTC

Ossessionato
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
 
Ossessionato
@qascooter avatar
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
UTC quote
TAKEN - 62 Allstate Exhaust
These are going to the TDC scooter club in Eugene

I've got a stock 125cc exhaust off a 1962 Allstate in good condition.
Just pay for postage.
Shoot me a PM with your address and I'll see what it's going to cost.

I figure if someone was restoring verses refurbishing, they might want an original. Or tight on cash, or want to chop it up for a project, or, or....
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
⚠️ Last edited by qascooter on UTC; edited 1 time
@qascooter avatar
UTC

Ossessionato
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
 
Ossessionato
@qascooter avatar
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
UTC quote
TAKEN - Stock P200 Shocks
These have been given away.

I've got stock P200 shocks, front and rear, off a 1979 in good condition.
Just pay for postage.
Shoot me a PM with your address and I'll see what it's going to cost.
Forum member supplied image with no explanatory text
⚠️ Last edited by qascooter on UTC; edited 1 time
@qascooter avatar
UTC

Ossessionato
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
 
Ossessionato
@qascooter avatar
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
UTC quote
TAKEN - 150cc 2-port cylinders
EDIT - These have been taken!

I've got two 150cc 2-port cylinders, with pistons. One is in great condition, one could use a hone and new piston, but probably could be used in a pinch.
Just pay for postage.
Shoot me a PM with your address and I'll see what it's going to cost.

BTW, these came from the Fashion Maven V oodoo, and he gave me the go-ahead to move them along. [/b]
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
⚠️ Last edited by qascooter on UTC; edited 2 times
@qascooter avatar
UTC

Ossessionato
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
 
Ossessionato
@qascooter avatar
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
UTC quote
TAKEN - Bajaj swing arm
These are going to the TDC scooter club in Eugene

This swing arm came from the illustrious V oodoo. He gave me the go-ahead to move it along. He actually sent me two, but one of them has a crack in the bearing race area. The Bajaj one is in good condition though.
Just pay for postage.
Shoot me a PM with your address and I'll see what it's going to cost.[/b]
Left is good, right has a crack in the bearing race area
Left is good, right has a crack in the bearing race area
Forum member supplied image with no explanatory text
⚠️ Last edited by qascooter on UTC; edited 1 time
@qascooter avatar
UTC

Ossessionato
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
 
Ossessionato
@qascooter avatar
79 P200E (Ruby), 62 Allstate (B-62)
Joined: UTC
Posts: 4124
Location: Florence, OR
UTC quote
SHIPPED - How to get a seat from Eugene to Seattle?
The seat is on its way to Voodoo Thanks for the kind offers to help with this!

I'm trying to get this seat back to V oodoo for his protege. It's missing springs and a cover and would be cost prohibitive to ship.

If anybody is driving up the 5 to Seattle maybe a handoff could be made?

Just thought I'd post it here and see....
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
⚠️ Last edited by qascooter on UTC; edited 2 times
@geeklion avatar
UTC

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
 
The Dude
@geeklion avatar
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
UTC quote
Way to post up with some good helping hands Gascooter! Good stuff to pay it forward

I'll add to the mix here too. I've got 3 exhausts for whomever need's them.

1. LML P200 exhaust: looks and works just fine
2. Stock 100 sport exhaust w/ broken outlet pipe. Just ZipZap that outlet back on and roll the rusty box!
3. Proma smallframe exhaust. Fits 90-125, but not 100 sport! A bit hammered, has been repair welded, and rough around the edges. Perfect beater pipe.

Take one or take all, just cover the shipping.
Forum member supplied image with no explanatory text
⬆️    About 4 months elapsed    ⬇️
@sdjohn avatar
UTC

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
 
Veni, Vidi, Posti
@sdjohn avatar
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
UTC quote
Have:
VBB seats (note: pillion seat and covered seat are gone)
8” wheels (2 chrome spoken for)
2 VBB tanks
Stock 2 port exhaust
8” tires no miles but old date codes
Crash bars that require drilling (for your rat bike!)
Some shocks (black one claimed)
P series cowls
Rear rack for p but shipping is cost prohibitive, locals preferred


Need:
P series brake/clutch levers
Rear turn lenses clear or amber
Px style speedo
Px floor mats, mine were trashed and I’m gonna have to do a bit of floor rust management
Px/Stella seat cover or whole seat
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
⚠️ Last edited by sdjohn on UTC; edited 2 times
@birdsnest avatar
UTC

Not So Moderator
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
 
Not So Moderator
@birdsnest avatar
VNB VSC 09C VMA VSX - vbc vmb
Joined: UTC
Posts: 7813
Location: Hustletown, TX
UTC quote
Will swap the pillion seat pad for 4 (slightly used) clear p turn signal lenses? I’ll pay the difference In posting cost.
?
@sdjohn avatar
UTC

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
 
Veni, Vidi, Posti
@sdjohn avatar
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
UTC quote
Birdsnest wrote:
Will swap the pillion seat pad for 4 (slightly used) clear p turn signal lenses? I’ll pay the difference In posting cost.
?
absolutely but I gotta warn you the foam is needing a juice up on that pillion one, if you’re still interested pm me!
@sdjohn avatar
UTC

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
 
Veni, Vidi, Posti
@sdjohn avatar
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
UTC quote
More haves:
20 17 carb
Miscellaneous Stella electrical parts like Cdi and coil (spoken for)
Stella horn cast
Cut Stella fender
⚠️ Last edited by sdjohn on UTC; edited 1 time
@mjrally avatar
UTC

Veni, Vidi, Posti
73 & 74 Rally, 76 ET3, 80 P200, 06 PX150, 61 Ser 2, 65 Silver Special, 90 V5N 50, 01 ET2, 2015 HD Road Glide Special
Joined: UTC
Posts: 5019
Location: Oceanside, CA
 
Veni, Vidi, Posti
@mjrally avatar
73 & 74 Rally, 76 ET3, 80 P200, 06 PX150, 61 Ser 2, 65 Silver Special, 90 V5N 50, 01 ET2, 2015 HD Road Glide Special
Joined: UTC
Posts: 5019
Location: Oceanside, CA
UTC quote
John,

I’ll tell your Stella CDI and electronics. I’ve got your turn signals and levers. Text me when you can cruise to Oceanside and we’ll dig through my storage unit for anything else you might need.
@sdjohn avatar
UTC

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
 
Veni, Vidi, Posti
@sdjohn avatar
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
UTC quote
MJRally wrote:
John,

I’ll tell your Stella CDI and electronics. I’ve got your turn signals and levers. Text me when you can cruise to Oceanside and we’ll dig through my storage unit for anything else you might need.
done, I had a feeling we’d find some goodies in your stash, let me work this thing a bit before I come out, there may be more surprises as I try the electrical and fire it up.
UTC

Addicted
1968 VBB150
Joined: UTC
Posts: 686
Location: OC
 
Addicted
1968 VBB150
Joined: UTC
Posts: 686
Location: OC
UTC quote
Looking at that black shock- Im definitely interested for one of my projects.
@mor avatar
UTC

Enthusiast
1974 v90, 1959 Allstate, 1979 p200
Joined: UTC
Posts: 79
Location: Eugene, OR
 
Enthusiast
@mor avatar
1974 v90, 1959 Allstate, 1979 p200
Joined: UTC
Posts: 79
Location: Eugene, OR
UTC quote
Interested in 2 chrome wheels and the s83 tire. I have a stella seat and may have the rear turn signals in clear.
@geeklion avatar
UTC

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
 
The Dude
@geeklion avatar
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
UTC quote
What do those P-series cowls look like?
@geeklion avatar
UTC

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
 
The Dude
@geeklion avatar
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
UTC quote
I could also use those 8" wheels, 2 or 3 depending on what ya still got. Just let me know what you still need for your projects and I'll dig around
@sdjohn avatar
UTC

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
 
Veni, Vidi, Posti
@sdjohn avatar
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
UTC quote
OK, so I'm gonna clean up the list here for ya.

Have:
VBB seats (two bare ones remain, but if you hit up greasy he will give you a white seat cover, really)
8” wheels (1 painted, 1 rusty)
1 VBB tank (the surface rusted one is still here)
Stock 2 port exhaust
8” tires no miles but old date codes (whitewalls are still here)
Crash bars that require drilling (for your rat bike!)
Some shocks (the red one)
P series cowls (see new picture below, they have character Razz emoticon )
Rear rack for p but shipping is cost prohibitive, locals preferred
Stella horn cast - silver
Cut Stella fender (see new picture below)
Malossi 210 cylinder head
Polini Large Carb manifold for 200



Need:
Px style speedo
Px floor mats, mine were trashed and I’m gonna have to do a bit of floor rust management
VBB fender
VBB speedo or VNA speedo, I have both styles of headset but no speedo
Carb box top and rubber
Carb to frame bellows
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
Forum member supplied image with no explanatory text
⚠️ Last edited by sdjohn on UTC; edited 4 times
@sdjohn avatar
UTC

Veni, Vidi, Posti
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
 
Veni, Vidi, Posti
@sdjohn avatar
'15 GTS300, '86 PX125EFL, '66 VBB, '01 ET4
Joined: UTC
Posts: 8046
Location: San Diego, CA
UTC quote
GeekLion wrote:
What do those P-series cowls look like?
GeekLion wrote:
I could also use those 8" wheels, 2 or 3 depending on what ya still got. Just let me know what you still need for your projects and I'll dig around
I snapped some pics and added them for you. On the wheels, I have the painted and the rusty one left. I also added what I still need and some new things I hadn't included before.
UTC

Molto Verboso
1958 Allstate 177VMC, 1962 Allstate, Yamaha Vino 70cc
Joined: UTC
Posts: 1777
Location: Philadelphia
 
Molto Verboso
1958 Allstate 177VMC, 1962 Allstate, Yamaha Vino 70cc
Joined: UTC
Posts: 1777
Location: Philadelphia
UTC quote
I've got these bits looking for a good home:
VNA 3 Speed shift box.
VNA 3 Speed shift box.
⚠️ Last edited by FridayMatinee on UTC; edited 1 time
@geeklion avatar
UTC

The Dude
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
 
The Dude
@geeklion avatar
Too Many piles of Junk that need too much work and too much money
Joined: UTC
Posts: 1643
Location: PNW from LBC
UTC quote
FridayMatinee wrote:
I've got these bits looking for a good home:
I'll take the P-series Kicker. Perfect timing as I was about to post a WTB.
Let me know if you're looking for anything in trade. TIA!
DoubleGood Design banner

Modern Vespa is the premier site for modern Vespa and Piaggio scooters. Vespa GTS300, GTS250, GTV, GT200, LX150, LXS, ET4, ET2, MP3, Fuoco, Elettrica and more.

Buy Me A Coffee
 

Shop on Amazon with Modern Vespa

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com


All Content Copyright 2005-2024 by Modern Vespa.
All Rights Reserved.


[ Time: 0.2368s ][ Queries: 4 (0.2006s) ][ Debug on ][ 309 ][ Thing One ]