Modern Vespa

I also have a stator and flywheel

Grips @20 years + 1 hour:

Not a vintage bit, but maybe one of y'all can use it?

Moto Tassinari VForce3, part #V384A. Never used. Only purchased to see if the reed cage was more suitable for a '00s PGO intake than the cage in a V352A.

Spoiler alert: it wasn't.

Free to a good home, postage included.

Dibs on the grips Scott. I have an upcoming project that they would be perfect for. Hopefully i can make them last at least another 21 years?

They're yours brother!

No photos unfortunately, but I have a handful of spare Stella parts. I have 2 complete LML carbs with the reed. I know they are hard to find so hopefully someone wants them. I am however looking for p cases or LML cases. Or P side cowls.

I might be able to help with cases. Do you want an LML case or a small block P case?

Either or dosnt matter to me. Probably a LML case if I had to choose.

Hard to beat the LML cases for tuning if you're going reeds.

With my short presence on here, you know me so well

I'll dig one up when I go to the shop next.

Some people just have that Vibe.

I checked the shop and I have mostly complete LML engines. I apparently gave a buddy in Phoenix the one that was just a shortblock.

Heading to LA tomorrow, but I'll take another look when I get back. Just want to make sure I have enough engines to go along with the chassis I have.

Sweet, I'm in no rush. Just gonna slowly try to gather parts for next winters build. Appreciate the follow up!

Hello,

Still available ?

Thanks

It sure is Colin. PM me your address and we'll see how much it'll cost to get to you, and if it'll be worth it

I seriously doubt it will be. Weight == cost shipping internationally.

I think I have some cowls (at least 1 for sure), but shipping will kill ya.

Hit up GeekLion. He has a site he uses for UPS that's way cheaper than going direct, but I can't find the name of it in my texts. He shipped me two lammy cowls plus a bunch of other stuff and it was about $50 from Oregon to Nashville.

Hi folks, I'm in need of a stella or P series glove box. I'm working on putting together a clapped out Stella for a guy who desperately wants a bike. I have many fine wares to trade or cold hard cash for you. Also need a non-blown big end bearing crank for a small block.

I probably have a known good stock Stella crank or maybe even a flowed 57mm in the Dragon's Hoard.

Unfortunately, I can't say for sure until I get back in town

So I checked how much to ship the stator and flywheel to ColinBelgium...

Between $40 to $72 US dollars (depending on carrier), but it needs a custom declaration form (No idea how to get one of these) and depending on the customs declaration number will depend on the tariff.

If anybody knows what the customs code is, I'd appreciate it. It's about 7 lbs...

Thanks y'all!

Custom forms,
https://www.usps.com/international/customs-forms.htm

Yes, thanks Grunpnut, but you need the tariff code for the form, which I do not know...

I have no experience shipping internationally but have plenty experience using PayPal shipping system, which lets you choose between carriers.

Thanks qascooter, it is going to be overpriced at the end.

Yesterday I took informations here in Belgium with some friends who regularly import some used parts from the US for their old cars.

When the part arrives at the customs here, I have to pay around 25€ fee + importation tax based on the shipping cost and the part price, and 21% VAT on that importation tax, a tax on a tax, funny no ?

Or, only 25$ if I can prove that is a gift, and the part price must be below 45€.

The customs send you a letter with the quote, you then have to mail them with the proof it is a gift (printscreen of the forum), and a way to prove the part price is below 45€ (No clue...).
It can take weeks before you get an answer, and you can't be certain they will accept.

This takes more energy than explaining a flat earther that it is spherical

Well, we tried. Sorry it didn't work out my friend...

Does anyone have a single VNA center stand bracket?
One of mine fell off at some point.

Looks like this:
https://www.sip-scootershop.com/en/product/centre-stand-mounting-plate-084231-for-vespa-58-61-vna-vba-vbb-t4_13533100?usrc=Center%20stand