Modern Vespa

I've got a one. Not sure if its non-injected though. Has a hook type slide and says SI20/20D on it, complete other than missing the banjo fitting and bolt.

Awesome. Does it have a second hole on the bottom of it in addition to the much larger fuel one? PM'ing you as well.

Ape was kind enough to offer up his oil injected carb. I unfortunately need a non-injected one. So still looking if anyone has one around it would be the tits.

Anyone have a spare Super/Sprint/PX150/Stella cylinder head laying around? My buddy stripped his spark plug hole!

I need a couple of PX side panels. Condition not critical as intending to respray. Would need to be UK based.

looking for a side kick stand for my px and a corsa racing seat. Willing to pay. PM me if interested.

I just found that the short bolt which holds my engine onto the rear shock has vibrated stripped. I wiggled it out without any tools.
If you got one lying about let me know, I'd trust yours more than the shite from home depot!

I'm building a VBB. I need odds and ends like floor rails, cowl/fender trim, legshield trim. Repop stuff is fine. Anything you've got collecting dust, or you took off in pursuit of original stuff.

PM me what you have, and we'll work something out.

Anyone holding a small taper Electronic Ignition flywheel for Smallframes? I'll pay for it!

does anyone have a summer plug?

I have a newer SITO+ for a P125/P150 with 40 miles on it.

I'm looking fora SITO+ for a P200. Anyone have a SITO+ for a P200 they would be interested in trading for my SITO+

Could use some p200 parts for project.

Great idea on exploring each other project hand me Downs. I have nothing to trade yet but am looking for engine plastic shroud p200. Oil cap plus other nuts bolts screws rubber this or that to complete sisters 1 St scoot rebulid/ resurecction. What I do have is a resale lisense looking to get an account with supplier ( digestions welcome) so we can order. Parts for projects.

i DESPERATELY need a front axle for a sprint/rally. is anyone holding?

The one thing(that I know of) missing from my p125x is the seat. Anyone have one, even one that needs reupholstered? Oh, and a spare wheel.(tire and tube not needed.

I'm still going through my stuff I got. If you look at my 'New to Vespas' thread, you can see some of the non-P stuff I have.

Would a P200 seat fit? I have a spare after market one that came with my purchase that I wont be needing. It has a tear and I robbed the seat lock but its yours for postage if you want it.

According to SccoterWest..."Seat for up to 1983 Vespa P200E-P125X-P150X VNX/VSX/VLX." So it should interchange with no problems.

Yes it will fit.

I am looking for a Euro headset for my 1970 Rally 180. Not looking for free. More than willing (and wanting) to pay, I just can't find one so far so I thought I'd put a feeler out here.

Thanks!

i am lookin that headset as well, all i have were only the trapezoid head for early sprint and later sprint but none are the round giant head.. anyone wanna trade 2 of my trap head for a single one giant round

ps: i know shipin will be costly but i am prepared

Sent you the aftermarket P seat today.

Enjoy
Rick

Wow!
Thanks Rick!

I was looking at my stuff and I guess I have an engine cowling if anyone needs it. It's for a smallframe I believe.

It's the gray one. Still has the part tag on it.

looking for a Rally speedo cable. I can paypal for shipping and costs.

I have a clean 16/16 carb/ with airbox(no wiremesh filter) from my V90. I'm kitting the bike and wont need it. Shipping costs via PayPal, send PM . Goes to 1st response who covers shipping. $6.00 shipping should cover the lower 48 states.

If anyone has the aluminum trim for around the windscreen of a '61 VNA, let me know. I have the black rubber on mine now, which I know is wrong, but it was less expensive.
But if there is a used unit out there, less than retail, I'm interested.
Thanks.

Maybe it will help stabilize the vibration issue I'm now facing???

I could really really use an early 3 speed driveshaft and a flywheel for v5a/v9a. Id be willing to part out my p200 project for that stupid axle.


I've got that sidestand and the bolt for the rear shock and just about everything else. Already sent out the handlebar switches.

I've also got a smallie 4 speed driveshaft brand new from motorsport. Its been stood up next to my 3 speed driveshaft and that's it. Hasn't touched a single thing.

Hook me up!

i have a t5 square arse frame for a px round arse frame

I have a complete though messy VNA 3 speed in my garage.
Does it use the 3 speed shaft you need?
If so, it's yours.
Lemme know

i really couldnt give a positive answer on that, but im leaning more towards them being different.

whats the year on that vna so i can get the right diagram to check.

appreciate it man!

If anyone has an original Veglia Borletti VBC speedo, I am willing (and eager) to pay for it!

i have a rally speedo for sale. im not sure it would fit. but ill just throw that out there

It's a 1958 vna 125.
serial #
VNA1M 031236

Need head, flywheel and crank for VSX. Anyone holding? Thanks

I too am looking for a 20/20 non-injector carb.

it seems the usual places are all out - scooterworks, scooter mercato

I can't locate it in SIP either.

I have a non injected spaco 24, i used the jet stack out of it. Came from a running scoot. Ill trade for a vnb speedometer if anyone has an OG laying around, working or not. shoot me a pm.

i have it but it will probally took about $30-$50 to ship it and thats mean it almost half of my salary

Looking for some parts to complete 1961 vnb

-ht coil internal like on vna or vbb style in the maroon bakelite with secondary coil
-8" spare holder front legshield or back seat so that I can carry a spare
-one brake lever stiletto with a slit in front
-2 floor rails for the center tunnel with endcaps. Early vnb or small frame (I think!)

Would be willing to pay extra for
-105mm front headlight parts, reflector, bezel, glass. as used in split headset and allstate
-4 speed vnb/ vbb christmas tree

Not much to offer right now but will post a list when this project is completed.
Thanks for this great idea!

Robert

Here's the nicest 8" spare holder I've seen @ 24.77 new & the seller has a lot of other random old stuff too reasonabley priced.


But brake levers I have & you may choose, new Mec Eur (@5$ I paid) or flaky used chrome free + postage.

Third item, maybe in 2 weeks, I need to take a look elsewhere.

Need a spare 10" rim if anyone has one. I have an avacado green Stella horn cast for trade; sans emblems.

Does anyone have a bearing race extractor tool (stupid SF Flyside bearing race!) that i can borrow? It would be most appreciated!