OP
UTC

Addicted
250 Super
Joined: UTC
Posts: 769
Location: 93441
 
Addicted
250 Super
Joined: UTC
Posts: 769
Location: 93441
UTC quote
Just ran across this link http://tinyurl.com/7kstfr6 Anyone have any information on this system and/or concept and would it easily install on the Vespas?
@stickyfrog avatar
UTC

Moderatus Rana
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
 
Moderatus Rana
@stickyfrog avatar
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
UTC quote
I like it. Sounds like a pulsating Stebil. The light show is pretty good too. I don't see why there would be any problem installing it.
@yanobobano avatar
UTC

Molto Verboso
GTS 250ie, GT 200 (cannonball scoot)
Joined: UTC
Posts: 1057
Location: Honolulu, Hawaii
 
Molto Verboso
@yanobobano avatar
GTS 250ie, GT 200 (cannonball scoot)
Joined: UTC
Posts: 1057
Location: Honolulu, Hawaii
UTC quote
They claim the air horn is comparable in size to the Stebel Nautilus (minus some sort of design flaw the Stebel has.) Here is a link to a wiki article on installing the Stebel on a GT200L https://modernvespa.com/forum/wiki-gt-stebel.
They also say that the control unit is the size of a matchbox which should fit... someplace.

I like that you can still maintain the friendly *toot*toot* horn and then it will go all crazy train when the need arises.

I like this idea a lot. Seriously thinking about backing it so I can get a system and try it out.
@stickyfrog avatar
UTC

Moderatus Rana
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
 
Moderatus Rana
@stickyfrog avatar
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
UTC quote
LOL crazy train. Laughing emoticon
@yanobobano avatar
UTC

Molto Verboso
GTS 250ie, GT 200 (cannonball scoot)
Joined: UTC
Posts: 1057
Location: Honolulu, Hawaii
 
Molto Verboso
@yanobobano avatar
GTS 250ie, GT 200 (cannonball scoot)
Joined: UTC
Posts: 1057
Location: Honolulu, Hawaii
UTC quote
the opening to the song was my first thought after the guy drove past the camera with everything going.
@waspmike avatar
UTC

Ossessionato
LXV 150 3v ie. Midnight Blue (Sold) Now Honda Zoomer X
Joined: UTC
Posts: 4131
Location: Kingdom of Lanna
 
Ossessionato
@waspmike avatar
LXV 150 3v ie. Midnight Blue (Sold) Now Honda Zoomer X
Joined: UTC
Posts: 4131
Location: Kingdom of Lanna
UTC quote
"standard" headlight modulators like Signal Dynamics modulate the headlight when the horn is pressed. So anyone with a stebel can do this.
@jess avatar
UTC

Petty Tyrant
0:7 and counting
Joined: UTC
Posts: 39189
Location: Bay Area, California
 
Petty Tyrant
@jess avatar
0:7 and counting
Joined: UTC
Posts: 39189
Location: Bay Area, California
UTC quote
waspmike wrote:
"standard" headlight modulators like Signal Dynamics modulate the headlight when the horn is pressed. So anyone with a stebel can do this.
Almost. One critical difference here is that the original horn can be retained, and the air horn is only activated if you hold down the horn button for 1/4 second or 1/2 second (your choice). That means you can give friendly beeps without blasting everyone around you.
@rangeraj avatar
UTC

Molto Verboso
2011 300GTV
Joined: UTC
Posts: 1741
Location: Cedar Rapids, Iowa
 
Molto Verboso
@rangeraj avatar
2011 300GTV
Joined: UTC
Posts: 1741
Location: Cedar Rapids, Iowa
UTC quote
I am very interested! Wha? emoticon
@rangeraj avatar
UTC

Molto Verboso
2011 300GTV
Joined: UTC
Posts: 1741
Location: Cedar Rapids, Iowa
 
Molto Verboso
@rangeraj avatar
2011 300GTV
Joined: UTC
Posts: 1741
Location: Cedar Rapids, Iowa
UTC quote
Also found a Facebook link on his site too.
@jess avatar
UTC

Petty Tyrant
0:7 and counting
Joined: UTC
Posts: 39189
Location: Bay Area, California
 
Petty Tyrant
@jess avatar
0:7 and counting
Joined: UTC
Posts: 39189
Location: Bay Area, California
UTC quote
I kicked in a sum sufficient for 2 full kits.
@boogie avatar
UTC

Hooked
Nero Abisso GTS300 SS
Joined: UTC
Posts: 315
Location: Australia
 
Hooked
@boogie avatar
Nero Abisso GTS300 SS
Joined: UTC
Posts: 315
Location: Australia
UTC quote
Yeah that looks pretty cool,nice to have the beep beep but a little longer for the WAAAAHHHH!!! and the flashing of the lights.

8)
@waspmike avatar
UTC

Ossessionato
LXV 150 3v ie. Midnight Blue (Sold) Now Honda Zoomer X
Joined: UTC
Posts: 4131
Location: Kingdom of Lanna
 
Ossessionato
@waspmike avatar
LXV 150 3v ie. Midnight Blue (Sold) Now Honda Zoomer X
Joined: UTC
Posts: 4131
Location: Kingdom of Lanna
UTC quote
Technically it is illegal in Thailand for non emergency vehicles to have modulating horns. But...
@judy avatar
UTC

World Traveler
2007 LX150 Daring Plum Leonardo Da Vespa
Joined: UTC
Posts: 29303
 
World Traveler
@judy avatar
2007 LX150 Daring Plum Leonardo Da Vespa
Joined: UTC
Posts: 29303
UTC quote
I just downloaded my video from the GoPro and watched it. It was a windy ride in parts,very windy and you can barely hear the horn when i beep it. You have the windows up and the radio on and a cager wouldn't hear it. wow.
OP
UTC

Addicted
250 Super
Joined: UTC
Posts: 769
Location: 93441
 
Addicted
250 Super
Joined: UTC
Posts: 769
Location: 93441
UTC quote
Thanks, comments seem to support what I was thinking, so will give it a shot. I'm thinking the control box will fit behind the left knee panel. Now if one of the pros could post a tutorial on installation when they come out...
@skymizer avatar
UTC

Ossessionato
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
 
Ossessionato
@skymizer avatar
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
UTC quote
I like the "friendly beep" function that Jess pointed out, It's a hoot to toot at folk walking and neighbors, etc. (without scaring the bageeza's outta them). So I will be putting in for one of these Banshee's today. I was about to order the Stebel nautilus compact...glad I saw this thread first! Thank you classic rider for the link!
@judy avatar
UTC

World Traveler
2007 LX150 Daring Plum Leonardo Da Vespa
Joined: UTC
Posts: 29303
 
World Traveler
@judy avatar
2007 LX150 Daring Plum Leonardo Da Vespa
Joined: UTC
Posts: 29303
UTC quote
Does it matter if you have a non stock head light? I have the Vleds bulb (system) in mine. Hmmmm.
@the_barron avatar
UTC

Member
2006 LX 150
Joined: UTC
Posts: 32
Location: Santa Ynez Valley, CA
 
Member
@the_barron avatar
2006 LX 150
Joined: UTC
Posts: 32
Location: Santa Ynez Valley, CA
UTC quote
This looks very cool.
Just ordered two complete units for the scoots.

"Film at 11."
@skymizer avatar
UTC

Ossessionato
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
 
Ossessionato
@skymizer avatar
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
UTC quote
Okay done, ordered full kit, now we wait to blow our horns
@vanilla avatar
UTC

Addicted
GTV 250
Joined: UTC
Posts: 697
Location: Virginia
 
Addicted
@vanilla avatar
GTV 250
Joined: UTC
Posts: 697
Location: Virginia
UTC quote
I need to separate the Stiebel compressor from the horn to get it to fit in the GTV. Rick also had to do this on his Super and remove the original "meep meep". My question is about space and fit. How do you find room in there to leave the original and add the big one?
@the_barron avatar
UTC

Member
2006 LX 150
Joined: UTC
Posts: 32
Location: Santa Ynez Valley, CA
 
Member
@the_barron avatar
2006 LX 150
Joined: UTC
Posts: 32
Location: Santa Ynez Valley, CA
UTC quote
Reports with Pictures Assignment
Ok everybody who has or will be backing the Banshee Horn project - Take a few pics & detail your install experience. We can then determine if this system is more effective than the traditional Steibel horn. My gut says it will.
UTC

Enthusiast
Vespa GTV 250
Joined: UTC
Posts: 81
Location: Laguna Niguel
 
Enthusiast
Vespa GTV 250
Joined: UTC
Posts: 81
Location: Laguna Niguel
UTC quote
Vanilla wrote:
I need to separate the Stiebel compressor from the horn to get it to fit in the GTV. Rick also had to do this on his Super and remove the original "meep meep". My question is about space and fit. How do you find room in there to leave the original and add the big one?
My thought too. I would guess some sort of external mounting would be the only way to leave the stock horn in place. There are some real creative members out there and I can't wait to see what solutions come out.
@rangeraj avatar
UTC

Molto Verboso
2011 300GTV
Joined: UTC
Posts: 1741
Location: Cedar Rapids, Iowa
 
Molto Verboso
@rangeraj avatar
2011 300GTV
Joined: UTC
Posts: 1741
Location: Cedar Rapids, Iowa
UTC quote
Vanilla wrote:
I need to separate the Stiebel compressor from the horn to get it to fit in the GTV. Rick also had to do this on his Super and remove the original "meep meep". My question is about space and fit. How do you find room in there to leave the original and add the big one?
Keep me posted Vanilla, as I want to install one in my GTV.
@stickyfrog avatar
UTC

Moderatus Rana
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
 
Moderatus Rana
@stickyfrog avatar
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
UTC quote
Just got a project update from the Banshee project.
Quote:
We are moving well with the production of the Banshee horn systems and are having a production run of 1000 systems done at present. We are aiming to ship all the systems late in February.
Good news as I have been delaying installing my Stebil until the control unit gets here.
@scutrbrau avatar
UTC

The Beer Guy
2010 GTS 300 Super and 2015 Kawasaki Versys 650 LT
Joined: UTC
Posts: 4744
Location: Nelson County, VA
 
The Beer Guy
@scutrbrau avatar
2010 GTS 300 Super and 2015 Kawasaki Versys 650 LT
Joined: UTC
Posts: 4744
Location: Nelson County, VA
UTC quote
Vanilla wrote:
I need to separate the Stiebel compressor from the horn to get it to fit in the GTV. Rick also had to do this on his Super and remove the original "meep meep". My question is about space and fit. How do you find room in there to leave the original and add the big one?
Use a bigger hammer.
@vanilla avatar
UTC

Addicted
GTV 250
Joined: UTC
Posts: 697
Location: Virginia
 
Addicted
@vanilla avatar
GTV 250
Joined: UTC
Posts: 697
Location: Virginia
UTC quote
Scutrbrau wrote:
Vanilla wrote:
I need to separate the Stiebel compressor from the horn to get it to fit in the GTV. Rick also had to do this on his Super and remove the original "meep meep". My question is about space and fit. How do you find room in there to leave the original and add the big one?
Use a bigger hammer.
Guess I won't be looking to you for help.
@charlesm avatar
UTC

Molto Verboso
GTS 250ie (Nicked) GTS300 Super (Sold before nicked), 2001 PX (green)
Joined: UTC
Posts: 1571
Location: London, England
 
Molto Verboso
@charlesm avatar
GTS 250ie (Nicked) GTS300 Super (Sold before nicked), 2001 PX (green)
Joined: UTC
Posts: 1571
Location: London, England
UTC quote
Great idea, just a couple of issues though...

1. Will it really fit somewhere if you leave the original horn?

2. Is there a way to temporarily disable it so that, when the bike is being MOT tested (every year in the UK) you can then get around any potentially legal problems.

I have asked 2 and will let you know what answer I get.

Charles.
@jess avatar
UTC

Petty Tyrant
0:7 and counting
Joined: UTC
Posts: 39189
Location: Bay Area, California
 
Petty Tyrant
@jess avatar
0:7 and counting
Joined: UTC
Posts: 39189
Location: Bay Area, California
UTC quote
charlesm wrote:
1. Will it really fit somewhere if you leave the original horn?
Probably not. At least, not without some imaginative ambition. It will be much easier to fit to my motorcycle (for one of the two intended units I hope to receive) than on a modern Vespa. That said, the important bit is really the electronics. I personally just really wanted the kickstarter project to succeed so he could bring the product to market.
charlesm wrote:
2. Is there a way to temporarily disable it so that, when the bike is being MOT tested (every year in the UK) you can then get around any potentially legal problems.
Does MOT care that a long beep sounds different than a short beep? Would they even hold down the horn long enough to find out?
@skymizer avatar
UTC

Ossessionato
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
 
Ossessionato
@skymizer avatar
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
UTC quote
To those that pledged and backed this banchee horn:
Did any of you receive an email from Kickstarter asking you to complete a form for your horn "color" choice?
I got an email this past Fri and then another one as a reminder Sat. to do just that.
On the email, I clicked a button and it took me to the survey/color form. I've been trying to complete the form and it keeps saying "I made a typo error and I have ten minutes to correct the mistake" (huh?) Okay, so I try over and over again till my 10 mins run out Then I'm told to sign into facebook to write to Peter Olt (CEO of the Banshee Horn). I sign in and write a brief note explaining my difficulty in completing and submitting the "color choice form" ....due to typo error. I am now waiting for a response as to what typo error I made.
@14perry avatar
UTC

Ossessionato
MP3 400 / BV250
Joined: UTC
Posts: 3809
Location: San Diego, California
 
Ossessionato
@14perry avatar
MP3 400 / BV250
Joined: UTC
Posts: 3809
Location: San Diego, California
UTC quote
jess wrote:
charlesm wrote:
1. Will it really fit somewhere if you leave the original horn?
Probably not. At least, not without some imaginative ambition. It will be much easier to fit to my motorcycle (for one of the two intended units I hope to receive) than on a modern Vespa. That said, the important bit is really the electronics. I personally just really wanted the kickstarter project to succeed so he could bring the product to market.
charlesm wrote:
2. Is there a way to temporarily disable it so that, when the bike is being MOT tested (every year in the UK) you can then get around any potentially legal problems.
Does MOT care that a long beep sounds different than a short beep? Would they even hold down the horn long enough to find out?
Just pull the fuse and the stock horn would remain.
@charlesm avatar
UTC

Molto Verboso
GTS 250ie (Nicked) GTS300 Super (Sold before nicked), 2001 PX (green)
Joined: UTC
Posts: 1571
Location: London, England
 
Molto Verboso
@charlesm avatar
GTS 250ie (Nicked) GTS300 Super (Sold before nicked), 2001 PX (green)
Joined: UTC
Posts: 1571
Location: London, England
UTC quote
14perry wrote:
jess wrote:
charlesm wrote:
1. Will it really fit somewhere if you leave the original horn?
Probably not. At least, not without some imaginative ambition. It will be much easier to fit to my motorcycle (for one of the two intended units I hope to receive) than on a modern Vespa. That said, the important bit is really the electronics. I personally just really wanted the kickstarter project to succeed so he could bring the product to market.
charlesm wrote:
2. Is there a way to temporarily disable it so that, when the bike is being MOT tested (every year in the UK) you can then get around any potentially legal problems.
Does MOT care that a long beep sounds different than a short beep? Would they even hold down the horn long enough to find out?
Just pull the fuse and the stock horn would remain.
Yeah, peter confirmed that you would just pull the fuse for the test. But you would have to have the original horn in place still so that something sounded.

If during the MOT they did hold the horn for half a second - yes, you would fail as the lights flash which would certainly be illegal.
@scutrbrau avatar
UTC

The Beer Guy
2010 GTS 300 Super and 2015 Kawasaki Versys 650 LT
Joined: UTC
Posts: 4744
Location: Nelson County, VA
 
The Beer Guy
@scutrbrau avatar
2010 GTS 300 Super and 2015 Kawasaki Versys 650 LT
Joined: UTC
Posts: 4744
Location: Nelson County, VA
UTC quote
SkyMiZeR wrote:
To those that pledged and backed this banchee horn:
Did any of you receive an email from Kickstarter asking you to complete a form for your horn "color" choice?
I got an email this past Fri and then another one as a reminder Sat. to do just that.
On the email, I clicked a button and it took me to the survey/color form. I've been trying to complete the form and it keeps saying "I made a typo error and I have ten minutes to correct the mistake" (huh?) Okay, so I try over and over again till my 10 mins run out Then I'm told to sign into facebook to write to Peter Olt (CEO of the Banshee Horn). I sign in and write a brief note explaining my difficulty in completing and submitting the "color choice form" ....due to typo error. I am now waiting for a response as to what typo error I made.
I got that, filled it in and sent it without any trouble. Since it was set up as a survey I'm unable to get back into it to take a look but it seemed pretty straightforward. Maybe a browser issue on your end?
@skymizer avatar
UTC

Ossessionato
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
 
Ossessionato
@skymizer avatar
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
UTC quote
Hmmm, that could be. It was so odd. I kept rechecking what I typed and all looked fine. I'll give them a call today. Just thought I'd pop the question here first, thanks Scutrbrau
@stickyfrog avatar
UTC

Moderatus Rana
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
 
Moderatus Rana
@stickyfrog avatar
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
UTC quote
Yep it worked fine for me too.
@skymizer avatar
UTC

Ossessionato
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
 
Ossessionato
@skymizer avatar
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
UTC quote
Thanks to you too sticky
I emailed and called Banshee today (Tampa, FL) spoke to Greg. He said there must have been a computer gliche at kickstarter's website with the survey/color form ( ) He processed my survey/color choice and said orders will start going out early March.
Glad that's sorted.
@14perry avatar
UTC

Ossessionato
MP3 400 / BV250
Joined: UTC
Posts: 3809
Location: San Diego, California
 
Ossessionato
@14perry avatar
MP3 400 / BV250
Joined: UTC
Posts: 3809
Location: San Diego, California
UTC quote
judy wrote:
Does it matter if you have a non stock head light? I have the Vleds bulb (system) in mine. Hmmmm.
The only headlight that would be a problem would be a HID due to the delay they have. Anything that is instant on would work fine.
@judy avatar
UTC

World Traveler
2007 LX150 Daring Plum Leonardo Da Vespa
Joined: UTC
Posts: 29303
 
World Traveler
@judy avatar
2007 LX150 Daring Plum Leonardo Da Vespa
Joined: UTC
Posts: 29303
UTC quote
14 thank you. I really do need a loud horn. Altho i can probably yell louder than most horns. It was really noticeable when i filmed one of our rides. I was trying to get Dan's attention (he was riding a Harley with loud pipes) and i could barely hear my horn. It's only about 4 feet away from the camera and mic.
@vespiti avatar
UTC

Hooked
GTV 250, Mana 850, Stella 2T, BMW R75/6, 64 VBB, 64 GS160, 84 Moto Guzzi LeMans Mk3
Joined: UTC
Posts: 356
Location: NYC, Asbury Park NJ
 
Hooked
@vespiti avatar
GTV 250, Mana 850, Stella 2T, BMW R75/6, 64 VBB, 64 GS160, 84 Moto Guzzi LeMans Mk3
Joined: UTC
Posts: 356
Location: NYC, Asbury Park NJ
UTC quote
14perry wrote:
judy wrote:
Does it matter if you have a non stock head light? I have the Vleds bulb (system) in mine. Hmmmm.
The only headlight that would be a problem would be a HID due to the delay they have. Anything that is instant on would work fine.
I backed them in december for 3 kits but for motorcycles. I have an HID retrofit in my Aprilia motorcycle with projectors and all built by an aero space guy in CA. I checked it out first with him and he said no problem with Banshee.
@treppenwitz avatar
UTC

saggezza di scala
2009 'Burma Shave' Red GTS 250ie
Joined: UTC
Posts: 7068
Location: Israel
 
saggezza di scala
@treppenwitz avatar
2009 'Burma Shave' Red GTS 250ie
Joined: UTC
Posts: 7068
Location: Israel
UTC quote
I backed the project for a kit (at international rate) and did the follow-up color choice thing without a problem.

Haven't decided where exactly to fit everything on my Vespa... but I can't wait. This could be a life saver!

As Jess said, I hope this guy does well and his product goes on to be a success.
@stickyfrog avatar
UTC

Moderatus Rana
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
 
Moderatus Rana
@stickyfrog avatar
MP3 250 and 2 MP3 500s
Joined: UTC
Posts: 22671
Location: Nashville, Indiana
UTC quote
Starting to have doubts...Just got another email asking me to do something I already did:

Peter Olt says:

Hey John,

In order for us to get your Banshee Horn System out to you we need the following. In our recent Kickstarter survey you failed to answer the follow question "To receive my reward, I understand that horns must be used in a safe and responsible manner, hearing loss or permanent damage may result from unsafe use. I will comply with Federal/Country laws, local laws, noise ordinances, and D.O.T. sound levels laws."

Could you please complete your survey by answering this question with a yes or no or your name.

Thanks,

Banshee Horn LLC

Greg Moore
@skymizer avatar
UTC

Ossessionato
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
 
Ossessionato
@skymizer avatar
Scoot Sold
Joined: UTC
Posts: 3084
Location: NYS
UTC quote
sticky I would give Greg a call, it was the only way I could resolve the survey problem I was having. Funny thing is, I initially answered everything correctly (several times), and it still didn't fly Calling, leaving a message and getting a call back worked.
There is no way you overlooked that "checkbox." I didn't either. What's with all the delay re-questioning? Buying more time? Don't get it.
Here's Greg's # 727-744-6808 if you need it

Modern Vespa is the premier site for modern Vespa and Piaggio scooters. Vespa GTS300, GTS250, GTV, GT200, LX150, LXS, ET4, ET2, MP3, Fuoco, Elettrica and more.

Modern Vespa is made possible by our generous supporters.

Buy Me A Coffee
 

Shop on Amazon with Modern Vespa

Modern Vespa is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com


All Content Copyright 2005-2025 by Modern Vespa.
All Rights Reserved.


[ Time: 0.0396s ][ Queries: 3 (0.0213s) ][ live ][ 335 ][ ThingOne ]